Rotary Car Club - View Single Post - Radiator mod for v-mounts

88turboii · 02-13-2014, 06:14 PM

usually the lower pipe is too close to the ground. run over something and bam lose all your coolant. i question some of the v-mount radiators you see on ebay and whatnot, b/c both inlet and outlet are on the same endtank. it would be better if there was a divider in the middle of the endtank to prevent coolant from bypassing the tubes. or have the endtanks on the sides and not the bottom/top

02-13-2014, 06:14 PM	#2
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC Posts: 395 Rep Power: 18	usually the lower pipe is too close to the ground. run over something and bam lose all your coolant. i question some of the v-mount radiators you see on ebay and whatnot, b/c both inlet and outlet are on the same endtank. it would be better if there was a divider in the middle of the endtank to prevent coolant from bypassing the tubes. or have the endtanks on the sides and not the bottom/top Last edited by 88turboii; 02-13-2014 at 06:17 PM.