View Single Post
Old 02-27-2014, 05:18 PM   #3
Pete_89T2
Lifetime Rotorhead
 
Pete_89T2's Avatar
 
Join Date: Apr 2010
Location: Elkton, MD
Posts: 874
Rep Power: 16
Pete_89T2 is on a distinguished road
Quote:
Originally Posted by djmtsu View Post
You just wiggle it through from the outside.

There are 2 plugs under there that are NOT plugged into the ECU though....make sure they are unplugged!
^What he said, those 2 plugs that don't plug into the ECU are a PITA, especially if you didn't know they are there to begin with. I replaced my old crispy stock harness with a brand new one, so I was expecting those plugs, but it's still not easy to get to and physically unplug those suckers without little monkey hands. One tip that helped me out was I removed the glove box (door + insides, easy to do), and the lower dash trim where the dash speaker is. This was on an S5.
Pete_89T2 is offline   Reply With Quote