Rotary Car Club - View Single Post

myfree7 · 03-23-2014, 08:48 PM

After doing the brakes and a tune up on the rx8 I spent about 5hrs on the 7 this weekend. Timing is set, carb is tightened down, fuel lines done, and cleaned the dust out lol. Need to finish tightening the oil lines down and the clutch pedal. Still need coils, e-fan, battery, and a couple other little things before I can fire it up finally. Oh and the dreaded wiring lol

Test fit

Everything is pretty close, but it fit pretty good

03-23-2014, 08:48 PM	#45
myfree7 Rotary Fan in Training Join Date: Apr 2013 Posts: 62 Rep Power: 13	After doing the brakes and a tune up on the rx8 I spent about 5hrs on the 7 this weekend. Timing is set, carb is tightened down, fuel lines done, and cleaned the dust out lol. Need to finish tightening the oil lines down and the clutch pedal. Still need coils, e-fan, battery, and a couple other little things before I can fire it up finally. Oh and the dreaded wiring lol Test fit Everything is pretty close, but it fit pretty good