Quote:
Originally Posted by driftxsequence
Oil temps followed coolant. I think I stopped once oil hit 215-220. Currently I have the oil cooler sitting in front of the radiator. I feel this is a mistake and needs to be moved
|
It is
Quote:
Originally Posted by driftxsequence
but for ease of installation this was my choice. undertray is installed, and there is a rad panel in the front. you can see the ripped foil tape from where i had it sealing the intercooler.
|
The oil cooler is heating the radiator and the SS panel is as well.
Quote:
Originally Posted by driftxsequence
My fan is on a switch currently because the MS isnt clicking the relay. I can manually ground the relay and have the fan kick on, but the MS output wont ground it. it clicks on and off.
|
Probably something in the programming or just because megasuck
Quote:
Originally Posted by driftxsequence
here is my v mount, and you can see the oil cooler partially blocking the radiator.
|
Very similar to mine, except bigger rad, bigger dual oil coolers, bigger intercooler.
Quote:
|
How air-tight do I need it to be?
|
Mine is air tight and probably water tight. The more air you can force throught he heat exchangers, the lower the temps will be.
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC
DEALS GAP!! WOOHOOOO!!!!!
2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!
I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact
Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-
|