I was referring more to where you plumbed in the two lines leading from the Master Cylinder. I was trying to figure out what goes where in the proportioning valve, I think I've got it now though...
Heres the Prop Valve:
Essentially the two ports on the left are the "in" ports from the MC, and the two ports are the out ports leading to the brakes. The upper one leads to the front brakes, and the lower one leads to the rear, correct?
Yeah, I had run out to one of the chain autoparts stores (I can't remember if it was Advanced or Autozone) and picked up a bunch of their cheap pipe tools. After consulting with BAW I returned them, as it was a waste and I'd end up binning them all anyway

I'm just gunna borrow quality tools from Mike