View Single Post
Old 01-28-2015, 07:50 AM   #15
Pete_89T2
Lifetime Rotorhead
 
Pete_89T2's Avatar
 
Join Date: Apr 2010
Location: Elkton, MD
Posts: 874
Rep Power: 16
Pete_89T2 is on a distinguished road
Quote:
Originally Posted by project86 View Post
Ted. I really just plan on spirited street driving and maybe some occasional track use (autox or road racing) if the opportunity presents itself.
IF that's how the car will be used, THEN...

Quote:
Originally Posted by RETed View Post
Start with a set of KYB AGX's - these are the best bang-for-the-buck shocks for the FC...


-Ted

^Go with this, and a few other suspension bits you'll be super happy. I use my FC the same as you, and my setup started with the KYB AGX's. At the same time I put those in, I installed a set of Racing Beat springs, and later on replaced most of the stock bushings with the Energy Suspension polyurethane replacements (i.e, stabilizer bar bushings, front/rear control arms, etc.). Also added the Racing Beat "DTSS eliminator" bushings, because it felt like the stock DTSS bushings were worn out, and made the rear end handle unpredictably at the limits.

I'm still on stock wheels & tire sizes, and am very happy with this setup.
Pete_89T2 is offline   Reply With Quote