Not a lot to show, but have been making a lot of progress on the wiring tuck/relocation. I have removed all the erroneous wires that are no longer necessary and have re-routed the entire harness through the cabin. What I am doing is effectively inverting the U shape the harness originally takes out around the engine bay and sending it back through the cabin and under the bins. I will be mounting my battery in the bin, replacing the factory relay block and main fuse block with a bussman fuse/relay block (see below), and mounting the large factory fuse/relay block by the rear driver side shock tower. The entire front harness below will now be routed through the cabin and out of sight.
I have got the harness routed through the cabin currently and have extended all the wires that still need to go to the front (head lights, horns, turn signals, etc.). I need to extend the fuse/relay block wiring, mount the battery, and wire up the bussmann still. I have also fully deleted the air bag wiring.