Quote:
Originally Posted by project86
Pete I'm interested in the Oil Temp and Water Temp gauges. I need to check to see if they will match my OP gauge first though. I can't remember which one I bought. Where you using the temp sensor that you have to cut the radiator hose up?
|
The temp sensors are 1/8'NPT. When I was using these gauges, I installed the water temp sensor installed in a brass "T" fitting that I spliced with hose barbs into that 3/8" water hose that runs between the BAC & WP housing.
Alternatively, some FCs have an unused spot on the back of the WP housing where you can drill & tap for the 1/8"NPT sensor.
BTW, here's a link to the Prosport site for the same series gauges I'm selling so you can compare to your existing oil pressure gauge -
http://prosportgauges.com/amber_whit...ce_gauges.aspx