View Single Post
Old 09-28-2008, 11:07 PM   #5
FC Zach
RCC Loves Me Not You
 
FC Zach's Avatar
 
Join Date: Mar 2008
Location: Eagleville, TN
Posts: 2,267
Rep Power: 20
FC Zach is on a distinguished road
This worked for me. I took a tap close to the inner diameter of the roll pin and made threads. I then took a screw matching the tap and used that exposed bolt hangin out to pull the four roll pins out. To pull the pins out I used a block of wood and the crows foot end of a hammer. The block of wood is just to protect the housing from damage. Very simple and easy.
FC Zach is offline   Reply With Quote