View Single Post
Old 10-19-2008, 07:04 PM   #83
MaczPayne
Bah!
 
MaczPayne's Avatar
 
Join Date: Mar 2008
Location: Riverside, SoCal
Posts: 442
Rep Power: 18
MaczPayne is on a distinguished road
In the bin area, there should be a dimple on the trans tunnel. Drill a hole through that, and put the snubber through from the bottom and bolt it down, with washers to adjust preload on the pinion. The snubber is an Energy suspension bumpstop you can purchase from kragen, autozone, etc.

You can do it later if you choose, but it's easier to do with the subframe out of the way.
__________________
Johnson

TA FC in the works!
MaczPayne is offline   Reply With Quote