Rotary Car Club - View Single Post - FS: S5 Engine parts: rotors, iron side housings, ecentric shaft, front cover, etc.

Max777 · 12-08-2008, 05:48 PM

Ok, so I tore down my engine that had 141,000 on the clock. It did NOT loose an apex seal! My motor instead had a coolant seal leak in the front housing, so I ended up getting another motor to put in my car.

I have all the core parts available, but some of the stuff like the rotor housings, and the front side housing are trashed.
I am not looking to make mega bucks on this stuff, and if I do not sell anything, I will just use the pieces to practice porting, make a dummy engine block for fabrication, etc.

List of usable parts:

Middle Iron Plate
S5 Rear Iron Plate
Front cover
Ecentric Shaft
Both Hi Compression S5 rotors
Front Conterweight
Stock N/A flywheel
Front Stationary Gear
Rear Stationary Gear

The parts may not be brand new, but they seem too be in fair shape, and quite usable. Shoot me an offer, and I will be glad to work something out.

Pictures of rotors:

12-08-2008, 05:48 PM	#1
Max777 Pirate Join Date: Mar 2008 Location: Central IL Posts: 1,323 Rep Power: 19	FS: S5 Engine parts: rotors, iron side housings, ecentric shaft, front cover, etc. Ok, so I tore down my engine that had 141,000 on the clock. It did NOT loose an apex seal! My motor instead had a coolant seal leak in the front housing, so I ended up getting another motor to put in my car. I have all the core parts available, but some of the stuff like the rotor housings, and the front side housing are trashed. I am not looking to make mega bucks on this stuff, and if I do not sell anything, I will just use the pieces to practice porting, make a dummy engine block for fabrication, etc. List of usable parts: Middle Iron Plate S5 Rear Iron Plate Front cover Ecentric Shaft Both Hi Compression S5 rotors Front Conterweight Stock N/A flywheel Front Stationary Gear Rear Stationary Gear The parts may not be brand new, but they seem too be in fair shape, and quite usable. Shoot me an offer, and I will be glad to work something out. Pictures of rotors: __________________ Rotaries:They are NOT that complicated! Last edited by Max777; 01-04-2009 at 04:34 PM. Reason: added some pics.