Rotary Car Club - View Single Post

Garfinkles Motor Works · 12-10-2008, 01:45 AM

The red ones are stiffer because they are made from a different type of steel . pressed and welded in ths same equipment . The powder coating process can be done with a low temp powder at 250 degrees if they make it the color you need. I had some parts on my 7 done with the low temp powder and it is still good to go after several years . The regular temp powder is in the 400 degree range .

12-10-2008, 01:45 AM	#7
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	The red ones are stiffer because they are made from a different type of steel . pressed and welded in ths same equipment . The powder coating process can be done with a low temp powder at 250 degrees if they make it the color you need. I had some parts on my 7 done with the low temp powder and it is still good to go after several years . The regular temp powder is in the 400 degree range .