Rotary Car Club - View Single Post - Secondary throttle plates don't open all the way

need RX7 · 01-30-2009, 02:42 AM

I have my TB off the car at the moment, and I was playing around with it today and noticed that if I open it to WOT, the secondary plates don't look like they're rotated 90º relative to the closed position. I reached in and I can move them the rest of the way by hand, but they spring back to being slightly off when I let go. Any input on this? I also have done the TB mod so I have no thermowax or any of it's associated hardware.

EDIT: The primary opens fine (90º from closed)

01-30-2009, 02:42 AM	#1
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	Secondary throttle plates don't open all the way I have my TB off the car at the moment, and I was playing around with it today and noticed that if I open it to WOT, the secondary plates don't look like they're rotated 90º relative to the closed position. I reached in and I can move them the rest of the way by hand, but they spring back to being slightly off when I let go. Any input on this? I also have done the TB mod so I have no thermowax or any of it's associated hardware. EDIT: The primary opens fine (90º from closed) __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress. Last edited by need RX7; 01-30-2009 at 02:44 AM.