Rotary Car Club - View Single Post

Whizbang · 02-10-2009, 03:15 PM

Base specifications of the R100 / Familia

The best way to look at this is from a year to year perspective. All of the engine related technical information is in regards to a rotary powered vehicle unless otherwise noted.

1968

General info here

Specifications

Wheelbase: 89 inches
Length: 150.8 inches
Width: 58.3 inches
Height: 53 inches
Ride Height: ???? inches
Track: Front 47.2 / Rear 46.9
Curb Weight: 2,013 lbs

16 - 24 Mpg
13.2 Gallon Gas Tank

*The engine was carbureted with a 4 barrel Hitachi, 10A four port engine with a 9.4:1 compression ratio. Rated at 100 HP @ 7000 and 92 ft/lbs @ 4000.

*There were two transmissions available; a four speed manual and ????????? .
Manual gearing was as follows?????????????:
1st: 3.674
2nd: 2.217
3rd: 1.432
4th: 1.000

02-10-2009, 03:15 PM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 20	The R100 / Familia Info Thread Base specifications of the R100 / Familia The best way to look at this is from a year to year perspective. All of the engine related technical information is in regards to a rotary powered vehicle unless otherwise noted. 1968 General info here Specifications Wheelbase: 89 inches Length: 150.8 inches Width: 58.3 inches Height: 53 inches Ride Height: ???? inches Track: Front 47.2 / Rear 46.9 Curb Weight: 2,013 lbs 16 - 24 Mpg 13.2 Gallon Gas Tank The engine was carbureted with a 4 barrel Hitachi, 10A four port engine with a 9.4:1 compression ratio. Rated at 100 HP @ 7000 and 92 ft/lbs @ 4000. There were two transmissions available; a four speed manual and ????????? . Manual gearing was as follows?????????????: 1st: 3.674 2nd: 2.217 3rd: 1.432 4th: 1.000 __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook Last edited by Whizbang; 02-12-2009 at 11:32 PM.