Quote:
Originally Posted by WE3RX7
Sorry to not clarify - I wanted to run equal width on the fenders, so an extra 30mm out back if needed. Front tires are going to be a 245 or 255, rear will be 275.
Josh - thats the pic I remember seeing and liked, and your setup is almost spot on to what I want to run for the wheel as well. Any other pics of the rear fender, from different angles? How did you pull it out?
|
With the right offset you can fit a 255/40 and 275/40 stagger with stock fenders. The front may require a slight roll but there is no need for replacement fenders to fit that size tire.
I believe wheels will be 8.5 +30 front and 9.5 + 35 in the rear. Check the FC Wheel fitment tread on the evil forum and look for Blue TII's setup.
Now if you want a rear fender to match your front fenders, I believe you are in for a little custom work. Either FG or sheet metal. If you do FiberGlass, i would pulls a mold off of the near finished product incase you end up in a wreck. Use the mold to pull a new piece and viola, done.
Making your own rear fenders from scratch wouldn't be that hard at all, just VERY time consuming.