Rotary Car Club - View Single Post

***TitaniumTT*** · 03-07-2009, 01:19 AM

V/HMIC

I'd say no cutting at all but I cut out the frame support between the frame rails where the stock oil-cooler lived. Then there were a bunch of other tabs, supports, brackets and alot of other little things that met the business end of my plasma cutter.

I know Ian managed to do his HMIC with no cutting at all though.

However, being a 6-port turbo...... I would try to find one of those intercoolers with the in/out on the same side. Shift the intercooler over to one side and have the piping run together. Actually weld it together would look pretty slick, In my mind anyway.

03-07-2009, 01:19 AM	#8
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	V/HMIC I'd say no cutting at all but I cut out the frame support between the frame rails where the stock oil-cooler lived. Then there were a bunch of other tabs, supports, brackets and alot of other little things that met the business end of my plasma cutter. I know Ian managed to do his HMIC with no cutting at all though. However, being a 6-port turbo...... I would try to find one of those intercoolers with the in/out on the same side. Shift the intercooler over to one side and have the piping run together. Actually weld it together would look pretty slick, In my mind anyway.