|
Finished welding up the primaries just prior to the collector today. I heart my friends TIG. I also started the wastegate runner. Trying to cut a 90* to fit onto a pipe mid-way through is quite difficult. I still have a few cuts to make before I hit it with a die-grinder. I also well need to drill holes and hit the wastegate runner with a die-grinder once I finalize the position of the exits. There really isn't any room at all to run the wastegate runner just below the collector as it does interfere a lot with the actuators, and there's no room to mount them on the outside of the bend near the collector as it will hit the strut tower and/or the frame. The only other option would be to mount the wastegate runner on the underside of the manifold, and there's really no point to that especially with how compact the manifold already is.
|