Rotary Car Club - View Single Post - Help me make it to DGRR! Car will not rev...

FerociousP · 04-13-2009, 09:47 PM

with as little time as you have I would be trying as many spare parts as I could... mainly afm, and tps.

obviously its not compensating for you pressing the pedal by adding fuel, so it doesn't know your pressing the pedal or doesn't know its getting air... If I remember correctly the car won't run at all with a bad MAF. Have you tested the tps sweep for dead spots? Tested resistance at the beginning and end of the sweep?

Are you 100% sure you don't have a ginormous vacuum leak?

04-13-2009, 09:47 PM	#2
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro Posts: 1,046 Rep Power: 19	with as little time as you have I would be trying as many spare parts as I could... mainly afm, and tps. obviously its not compensating for you pressing the pedal by adding fuel, so it doesn't know your pressing the pedal or doesn't know its getting air... If I remember correctly the car won't run at all with a bad MAF. Have you tested the tps sweep for dead spots? Tested resistance at the beginning and end of the sweep? Are you 100% sure you don't have a ginormous vacuum leak? __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD Last edited by FerociousP; 04-13-2009 at 09:49 PM.