View Single Post
Old 05-14-2009, 03:30 PM   #4
Cp1
Rotary Fanatic
 
Cp1's Avatar
 
Join Date: Mar 2008
Location: Sask, Canada
Posts: 181
Rep Power: 18
Cp1 is on a distinguished road
i believe the adapters and dash pocket came from (READ ON IF YOU HAVE THE BOSE SYSTEM)
http://www.crutchfield.com/m_750/Car...n.html?tp=1385

http://www.crutchfield.com/p_003UPK7...t.html?tp=2114

(this was the exact kit i used though it did require shimming to fit tightly and it comes with 3 different sized bezels to match the deck, i used the largest which also made it flush with the ac panel)

the under pocket did need shimming to fit tightly otherwise the plastic clips have too wide of a gap and were allowing it to shift slightly, you can shim it with tape which i did and you wont see it and it tightens up nicely, if your worried that it will look shoddy dont it looks better than any other dash kit ive ever seen and fits better too.

But were sold through Futureshop/Bestbuy you should be able to call bestbuy and get the same kit(s)

It was a perfect match.

LINK FOR THE INSTALL COMPONENTS IF YOU HAVE THE BOSE SYSTEM:
http://www.crutchfield.com/m_750/Car...on.html?tp=457
__________________
Quote:
As the length of an online discussion nears infinity, the probability of a comparison involving Hitler or the Nazis approaches unity.
Quote:
Re-upholster your FD's console or anything else... ask me how! Thread: http://rotarycarclub.com/rotary_foru...ead.php?t=5157

Last edited by Cp1; 05-14-2009 at 03:45 PM.
Cp1 is offline   Reply With Quote