|
Well I did some testing this evening with the preturbo water injection. Cruising temps were 33c (91*F) A good pull in 4th gear caused temps to increase to 42*c (107.6F) this was at 15 psi (low boost) I then let the temps settle back to 33C and did a pull on high boost (23 psi) temps went back to 42c. So it seems that even though the water isn't lowering the temps it's keeping them at a constant temperature regardless of how much boost I run. I would do a pull from 1st to 4th to further test, but my drag radials are too narrow and just spin all over the place. (even in 4th they spin @ 23 psi)
Oh yeah I use the fast reacting sensor mentioned in the other thread so temperatures are accurate.
|