Rotary Car Club - View Single Post

Max777 · 10-19-2009, 02:08 PM

yeah, you dont need the hoses for the BAC, but you do need them for the thermowax.

I left my thermowax in, and right now the hose from the lower nipple on the turbo TB to the nipple on the rear iron is pissing me off.... make sure you use the stock-like hose, I tried using hose from autozone, and it was hell trying to get it onto the nipple....

As far as the top hose, you can use the "water pump housing -to- BAC hose and just run it to the top of the TB instead.

PS: Remove your secondary vaccum operated throttle plates if you feel like it, they are useless after the emissions are gone.
BUT DONT remove the thermowax pellet!

10-19-2009, 02:08 PM	#5
Max777 Pirate Join Date: Mar 2008 Location: Central IL Posts: 1,323 Rep Power: 19	yeah, you dont need the hoses for the BAC, but you do need them for the thermowax. I left my thermowax in, and right now the hose from the lower nipple on the turbo TB to the nipple on the rear iron is pissing me off.... make sure you use the stock-like hose, I tried using hose from autozone, and it was hell trying to get it onto the nipple.... As far as the top hose, you can use the "water pump housing -to- BAC hose and just run it to the top of the TB instead. PS: Remove your secondary vaccum operated throttle plates if you feel like it, they are useless after the emissions are gone. BUT DONT remove the thermowax pellet! __________________ Rotaries:They are NOT that complicated!