Door handle keyhole light with pictures

[Force13b]

I didn't even know there was such a thing tell I read this thread about a year ago when i was searching how to replace my door handles. I had forgotten about the light tell a few weeks ago when I pulled my friends door apart to fix the lock and saw the wires. Thought I'd take some pics of the install for anyone else looking to replace theirs.

I'll use some pics from my other thread to help with install. First pull of triangle
http://i23.photobucket.com/albums/b3...C/IMG_1840.jpg

Remove 1 bolt and 1 nut
http://i23.photobucket.com/albums/b3...C/IMG_1841.jpg

Remove the 2 clips 1 for lock, you don't have to but it makes it easier to see what you are doing.
http://i23.photobucket.com/albums/b3...C/IMG_1842.jpg

1 for door handle
http://i23.photobucket.com/albums/b3...C/IMG_1844.jpg

You'll see 2 white wires. You'll need to remove the lock fastener (wire around lock tumbler) in order to get the rubber light holder out. Well you don't have to but again it makes it easier.


What mine looked like


New red replacement bought at radio shack for 1.78$ "Grain of wheat 12v"





Both wires were white so i didn't think + - mattered. Maybe someone else can shed some light on this. Mine stays on for about 30seconds when you lift the door handle.