Blew a coolant seal what route should I go

Grappler · 01-05-2011, 01:58 AM

So I currently have a 86 gxl with a 6 port turbo setup

Currently I have the following installed
Walbro 255lph
Hks Filter
Portmatched and Milled TII LIM
TII UIM
550cc injectors
Aeromotive FPR
Emissions removed
AC/PS Removed
Rtek 2.1
Greddy Wideband
Autometer Boost Gauge
Greddy Pyrometer
S5 Turbo
Bonez Downpipe
TID Mod
Throttlebody mod
RP Precat replacement
-6 an ss Fuel lines
FD alternator
Exedy clutch
Recirculated Greddy RS
Air to water intercooler
Greddy turbo timer
New engine harness
Black magic efan

So I have a few options it looks like I can get away with a soft gasket replacement kit from atkins for about $150 keep my current setup and go from there.

On the other hand a lot of what I have is way overkill for what I currently have I could sell my A2W kit and Rtek rebuild the motor with 8.5 rotors and toss a stock topmount and ecu in there and be happy.

I could go back to N/a rock a bridgeport use the Rtek to tune or go carb with a weber 48 ida and sell all of my turbo stuff get a lot of money back and have a peppy N/a engine.

Most of what I mentioned is obviously not that easy but I am open to suggestions as this forum is a bit more "open minded and not so flame happy" as the evil forum :P

Thanks

Mazdabater · 01-05-2011, 03:43 AM

Your never gonna want to take a step backwards dude so n/a is out of the question. I'd just freshen it up give it a decent extend port and put it back together.

FC Zach · 01-05-2011, 04:10 AM

I'm an N/A guy and absolutely love it but if I had exactly what you have already invested in, I wouldn't go through the hassle of reversing mods to accommodate an N/A set-up.

Grappler · 01-05-2011, 09:21 AM

Well looks like I am going to stay turbo I guess my next question is what I should keep and what I should sell?

Should I keep my 9.4 rotors or go down to 8.5? Toss a stock ecu/topmount and be done so I can save up for a stand alone?

01-05-2011, 01:58 AM	#1
Grappler Rotary Fan in Training Join Date: Nov 2008 Posts: 31 Rep Power: 0	Blew a coolant seal what route should I go So I currently have a 86 gxl with a 6 port turbo setup Currently I have the following installed Walbro 255lph Hks Filter Portmatched and Milled TII LIM TII UIM 550cc injectors Aeromotive FPR Emissions removed AC/PS Removed Rtek 2.1 Greddy Wideband Autometer Boost Gauge Greddy Pyrometer S5 Turbo Bonez Downpipe TID Mod Throttlebody mod RP Precat replacement -6 an ss Fuel lines FD alternator Exedy clutch Recirculated Greddy RS Air to water intercooler Greddy turbo timer New engine harness Black magic efan So I have a few options it looks like I can get away with a soft gasket replacement kit from atkins for about $150 keep my current setup and go from there. On the other hand a lot of what I have is way overkill for what I currently have I could sell my A2W kit and Rtek rebuild the motor with 8.5 rotors and toss a stock topmount and ecu in there and be happy. I could go back to N/a rock a bridgeport use the Rtek to tune or go carb with a weber 48 ida and sell all of my turbo stuff get a lot of money back and have a peppy N/a engine. Most of what I mentioned is obviously not that easy but I am open to suggestions as this forum is a bit more "open minded and not so flame happy" as the evil forum :P Thanks

01-05-2011, 04:10 AM	#3
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN Posts: 2,267 Rep Power: 20	I'm an N/A guy and absolutely love it but if I had exactly what you have already invested in, I wouldn't go through the hassle of reversing mods to accommodate an N/A set-up. __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

01-05-2011, 09:21 AM	#4
Grappler Rotary Fan in Training Join Date: Nov 2008 Posts: 31 Rep Power: 0	Well looks like I am going to stay turbo I guess my next question is what I should keep and what I should sell? Should I keep my 9.4 rotors or go down to 8.5? Toss a stock ecu/topmount and be done so I can save up for a stand alone? Last edited by Grappler; 01-05-2011 at 09:27 AM.

01-05-2011, 03:43 AM	#2
Mazdabater FC3S Join Date: Jun 2010 Location: Townsville, QLD, AUS Posts: 326 Rep Power: 15	Your never gonna want to take a step backwards dude so n/a is out of the question. I'd just freshen it up give it a decent extend port and put it back together.