Crap load of TII parts

misterstyx69 · 09-13-2009, 08:26 PM

I have a 2.5 inch down pipe,and a 2.5 inch "unknown resonator"(I had it on my RB system but Cut the flange,then Extended the pipe,it didnt seal up).BOTH parts I am asking 110 USD shipped.
I have a Blown keg,TII shortblock.,.rear rotor is bad...If you want it you Take care of shipping TOO.,,200 bucks.
I have a couple lower manifolds.(TII) they have a block off or two on each of them.40 shipped.
S4 TII Upper manifold with No other parts on it.I also have the Throttle body and TPS..asking 110 shipped( you get a choice of Stock or modified throttle body).
Manual Rack with all the 'trimmings".(tie rods and Mounts).I want 160 USD shipped.
I have a set of TII 550 cc LO impedance Tan top injectors on the Fuel rails.I would like 100 Shipped for those.
I have more,just ask,.pm or post.
and I am Not stuck on Price.The rack is an exception though.
I will trade Parts.lets talk/haggle..etc..
Cheers Dave/STYX.

Max777 · 09-15-2009, 11:37 PM

i will take the downpipe, I will take the injectors, only need two of them...

do you happen to have a GOOD turbo?

misterstyx69 · 09-24-2009, 07:11 PM

Pm'ed you Max,before I saw this.
if you hook me up on MSN we can Yak. (misterstyx69@hotmail.com).I got lots of odds and ends and the More stuff you want,the better Prices are!
sorry No stock turbos.I have an s5 Exhaust mani,with a good gasket though.
FD Upper manifold,throttle body and TPS.
I also have a HUGE 3 inch IN and 4 INCH OUT..uhWhat???,,ya EXHAUST!(about 8 inches in diameter.but has hangers for an FC!.and FITs!)

misterstyx69 · 09-29-2009, 11:18 PM

Down pipe is now the property of my new Buddy Max!
Rails and injectors are gone on another Forum..Lower manifolds gone also.
all the rest of the stuff is still available..do not be SHY gentlemen..Ask/Barter.Trade/Buy..I got too much stuff and No storage..this will be a big heap of Rust Soon!

misterstyx69 · 10-06-2009, 09:23 PM

BUMP..
I wish I lived in the States!..I would ship the KEG!..right now it is a good Boat anchor!

gkarmadi · 10-11-2009, 09:11 PM

bump, for a great guy!!!

RotaryRoadRage · 10-13-2009, 09:36 PM

N370 map sensor for a s5 tii ?

misterstyx69 · 10-15-2009, 10:43 AM

Ya..a N370 is for an S5.
the N318 is a S4 TII part..
Engine is Now a Barn Yard Ornament.(not available any more.GONE).

RotaryRoadRage · 10-15-2009, 12:14 PM

dave.. so you do have it ? lol

misterstyx69 · 10-15-2009, 10:07 PM

Of course I have it!..(got what?).Pm me!

09-13-2009, 08:26 PM	#1
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario Posts: 198 Rep Power: 18	Crap load of TII parts I have a 2.5 inch down pipe,and a 2.5 inch "unknown resonator"(I had it on my RB system but Cut the flange,then Extended the pipe,it didnt seal up).BOTH parts I am asking 110 USD shipped. I have a Blown keg,TII shortblock.,.rear rotor is bad...If you want it you Take care of shipping TOO.,,200 bucks. I have a couple lower manifolds.(TII) they have a block off or two on each of them.40 shipped. S4 TII Upper manifold with No other parts on it.I also have the Throttle body and TPS..asking 110 shipped( you get a choice of Stock or modified throttle body). Manual Rack with all the 'trimmings".(tie rods and Mounts).I want 160 USD shipped. I have a set of TII 550 cc LO impedance Tan top injectors on the Fuel rails.I would like 100 Shipped for those. I have more,just ask,.pm or post. and I am Not stuck on Price.The rack is an exception though. I will trade Parts.lets talk/haggle..etc.. Cheers Dave/STYX.

09-15-2009, 11:37 PM	#2
Max777 Pirate Join Date: Mar 2008 Location: Central IL Posts: 1,323 Rep Power: 19	i will take the downpipe, I will take the injectors, only need two of them... do you happen to have a GOOD turbo? __________________ Rotaries:They are NOT that complicated!

10-11-2009, 09:11 PM	#6
gkarmadi water jacket mod?!! Join Date: Apr 2009 Posts: 25 Rep Power: 0	bump, for a great guy!!! __________________ 86GXL BSC streetport + TD07@13psi

10-13-2009, 09:36 PM	#7
RotaryRoadRage Rotary Fanatic Join Date: Jun 2008 Posts: 244 Rep Power: 17	N370 map sensor for a s5 tii ? __________________ 89 TII black on black Gamer tag - graveconditions

10-15-2009, 12:14 PM	#9
RotaryRoadRage Rotary Fanatic Join Date: Jun 2008 Posts: 244 Rep Power: 17	dave.. so you do have it ? lol __________________ 89 TII black on black Gamer tag - graveconditions

09-24-2009, 07:11 PM	#3
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario Posts: 198 Rep Power: 18	Pm'ed you Max,before I saw this. if you hook me up on MSN we can Yak. (misterstyx69@hotmail.com).I got lots of odds and ends and the More stuff you want,the better Prices are! sorry No stock turbos.I have an s5 Exhaust mani,with a good gasket though. FD Upper manifold,throttle body and TPS. I also have a HUGE 3 inch IN and 4 INCH OUT..uhWhat???,,ya EXHAUST!(about 8 inches in diameter.but has hangers for an FC!.and FITs!)

09-29-2009, 11:18 PM	#4
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario Posts: 198 Rep Power: 18	Down pipe is now the property of my new Buddy Max! Rails and injectors are gone on another Forum..Lower manifolds gone also. all the rest of the stuff is still available..do not be SHY gentlemen..Ask/Barter.Trade/Buy..I got too much stuff and No storage..this will be a big heap of Rust Soon!

10-06-2009, 09:23 PM	#5
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario Posts: 198 Rep Power: 18	BUMP.. I wish I lived in the States!..I would ship the KEG!..right now it is a good Boat anchor!

10-15-2009, 10:43 AM	#8
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario Posts: 198 Rep Power: 18	Ya..a N370 is for an S5. the N318 is a S4 TII part.. Engine is Now a Barn Yard Ornament.(not available any more.GONE).

10-15-2009, 10:07 PM	#10
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario Posts: 198 Rep Power: 18	Of course I have it!..(got what?).Pm me!