|
|||||||
| RX-7 1st Gen Specific (1979-85) RX-7 1979-85 Discussion including performance modifications and technical support sections |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 1st Gen Specific (1979-85) RX-7 1979-85 Discussion including performance modifications and technical support sections |
|
|
|
Thread Tools | Display Modes |
03-17-2013, 10:52 PM
|
#1 |
|
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20  |
gauge cluster wiring
trying to wire in a gauge cluster in the rally rx7. basically, there is no harness, so im running wire to the plugs that should make the cluster work.
i have the green/yellow power wire, tach, fuel hooked up and all the grounds off the two plugs. But, when i kick power on, nothing happens. fuel gauge doesnt work, tach doesnt work with the car running, battery gauge shows nothing... frankly, i have no idea why. is there a wire im missing? There is a two prong male connector that is just hanging out on the cluster. (not the other two prong that connects to the top lights). Grounds are good, i have 12vs to the green/yellow wire...
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
|
|
|
03-17-2013, 11:43 PM
|
#2 |
|
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 |
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
