|
|||||||
| Old School Rotary (Pre-1979) Pre-1979 Discussion including performance modifications and technical support sections |
|
|
Thread Tools | Display Modes |
|
|||||||
| Old School Rotary (Pre-1979) Pre-1979 Discussion including performance modifications and technical support sections |
|
|
Thread Tools | Display Modes |
|
|
02-10-2009, 03:15 PM
|
#1 |
|
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 21  |
The R100 / Familia Info Thread
Base specifications of the R100 / Familia
The best way to look at this is from a year to year perspective. All of the engine related technical information is in regards to a rotary powered vehicle unless otherwise noted. 1968 General info here Specifications Wheelbase: 89 inches Length: 150.8 inches Width: 58.3 inches Height: 53 inches Ride Height: ???? inches Track: Front 47.2 / Rear 46.9 Curb Weight: 2,013 lbs 16 - 24 Mpg 13.2 Gallon Gas Tank *The engine was carbureted with a 4 barrel Hitachi, 10A four port engine with a 9.4:1 compression ratio. Rated at 100 HP @ 7000 and 92 ft/lbs @ 4000. *There were two transmissions available; a four speed manual and ????????? . Manual gearing was as follows?????????????: 1st: 3.674 2nd: 2.217 3rd: 1.432 4th: 1.000
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook Last edited by Whizbang; 02-12-2009 at 11:32 PM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode