|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Rotary Fan in Training
Join Date: Jan 2010
Posts: 32
Rep Power: 0 ![]() |
rpm cutting out
Just happily got my car back and breaking in the engine
![]() |
![]() |
![]() |
![]() |
#2 |
RCC Addict
Join Date: Mar 2008
Location: Honolulu, Hawaii USA
Posts: 1,813
Rep Power: 19 ![]() |
You have an electrical problem in the car.
Sorry to be so generic, but there is no way to narrow down the problem without a thorough diagnosis. With that said, it's a PITA to troubleshoot these kinda problems. The tach dropping is an effect of the problem - not a cause. It's normally for the tach to not work like that when you abruptly kill the power to the stock ECU. -Ted |
![]() |
![]() |
![]() |
#3 |
Rotary Fan in Training
Join Date: Jan 2010
Posts: 32
Rep Power: 0 ![]() |
electrical problems again... thanks for the help good sir.
|
![]() |
![]() |
![]() |
#4 |
Rotary Fan in Training
Join Date: Aug 2010
Posts: 39
Rep Power: 0 ![]() |
Could be the CAS with a bad connection. Drive around, shakes loose, no RPM signal means no start. Barely gets the connection, car starts. Intermittent problems like that tend to be a bad connection somewhere in the wiring. Just a quick 4:55 a.m. thought.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|