Nikki Question

one320fc · 01-12-2012, 07:13 PM

So I have the Nikki apart working a rebuild and took the inlets of to find a set screens/filters not sure what they would be considered. Do I need to replace these? My rebuild kit did not have these in it. Thanks!

2012-01-12_18-53-15_584.jpg

one320fc · 01-14-2012, 01:34 PM

Nobody have an answer to this?? I want to put my nikki back together...

12arotary · 01-14-2012, 01:39 PM

If you are talking about the screen right at fuel inlet pipe, right on the outside of the carb on the side facing the distributor when its in the car i have always just cleaned those out and reused them

heavyarms89 · 01-20-2012, 01:55 AM

i was told from a very reliable source if you are using a good inline filter then the screens are not needed. also where did you get your rebuild kit and how much did you pay for it.

one320fc · 01-21-2012, 07:53 PM

A buddy of mine works at a local auto parts store, I got it for 35.00 after tax

Rich@SR · 01-22-2012, 08:38 PM

No kit that i'm aware of come with the screens and in my opinion it's ok to not replace them if you have an inline filter. Otherwise just clean the old ones in some parts cleaner and put them back in. Also my personal choice is the GP Sorenson kit from autozone. Compaired to other kits I've purchased... some twice the price... it's the best one. Just make sure you get the one that comes with the check balls, it's like 3 bucks more.

one320fc · 01-24-2012, 12:08 PM

Quote:

Originally Posted by Rich@SR

No kit that i'm aware of come with the screens and in my opinion it's ok to not replace them if you have an inline filter. Otherwise just clean the old ones in some parts cleaner and put them back in. Also my personal choice is the GP Sorenson kit from autozone. Compaired to other kits I've purchased... some twice the price... it's the best one. Just make sure you get the one that comes with the check balls, it's like 3 bucks more.

yea I would like to have a filter at the carb, any chance on getting the info on the Jegs unit on your carb? Not looking for any trade secrets but looks pretty good!

Rich@SR · 01-24-2012, 01:26 PM

Quote:

Originally Posted by one320fc

yea I would like to have a filter at the carb, any chance on getting the info on the Jegs unit on your carb? Not looking for any trade secrets but looks pretty good!

Hey no sweat, not looking to keep trade secrets. I'm happy to share info. My setup uses a 6 AN fitting which I welded onto the stock fuel hard line at the carb.

Mine:
http://www.jegs.com/i/JEGS+Performan...15034/10002/-1

If you don't want to convert to AN fittings you can use this with stock line setup:
http://www.jegs.com/i/JEGS+Performan...15042/10002/-1

Both models utilize a replaceable screen inside for convenience.
http://www.jegs.com/i/JEGS+Performan...15045/10002/-1

one320fc · 01-24-2012, 06:10 PM

Quote:

Originally Posted by Rich@SR

Hey no sweat, not looking to keep trade secrets. I'm happy to share info. My setup uses a 6 AN fitting which I welded onto the stock fuel hard line at the carb.

Mine:
http://www.jegs.com/i/JEGS+Performan...15034/10002/-1

If you don't want to convert to AN fittings you can use this with stock line setup:
http://www.jegs.com/i/JEGS+Performan...15042/10002/-1

Both models utilize a replaceable screen inside for convenience.
http://www.jegs.com/i/JEGS+Performan...15045/10002/-1

Thanks for all the info! if my cash flow wasnt a issue I would just be sending you my carb!
Should be trying to put the carb back together this weekend, need to look the carb over real good no check balls came out during tear down and I have new ones that came with my re-build kit..

Rich@SR · 01-24-2012, 06:52 PM

Quote:

Originally Posted by one320fc

Thanks for all the info! if my cash flow wasnt a issue I would just be sending you my carb!
Should be trying to put the carb back together this weekend, need to look the carb over real good no check balls came out during tear down and I have new ones that came with my re-build kit..

Hey no sweat, I also offer a machining package for all you DIY'ers who don't have access to a lathe and what not. That way you can still have an SR Nikki, just have to assemble it yourself.

Pink Monster · 11-25-2013, 01:58 AM

Hi all if any one can assist me please I'm from South Africa I need the jetting sizes on n 12A full street port engine its an old 79 model engine if possible can someone email me thenads747@gmail.com thanks

Regards
Wynand AKA Pink monster

01-12-2012, 07:13 PM	#1
one320fc one Apex @ a time Join Date: Feb 2008 Location: Culpeper VA Posts: 272 Rep Power: 18	Nikki Question So I have the Nikki apart working a rebuild and took the inlets of to find a set screens/filters not sure what they would be considered. Do I need to replace these? My rebuild kit did not have these in it. Thanks! 2012-01-12_18-53-15_584.jpg __________________ 1983 Limited Edition SOLD 1977 Mazda REPU I will work on it one day I sware!! 1987 T2 um after the repu is done?? 2013 Chrysler 200 DD 2009 Dodge Journey 94 Volvo 850 N/A The slowest car I have EVER owned!!!

01-14-2012, 01:34 PM	#2
one320fc one Apex @ a time Join Date: Feb 2008 Location: Culpeper VA Posts: 272 Rep Power: 18	Nobody have an answer to this?? I want to put my nikki back together... __________________ 1983 Limited Edition SOLD 1977 Mazda REPU I will work on it one day I sware!! 1987 T2 um after the repu is done?? 2013 Chrysler 200 DD 2009 Dodge Journey 94 Volvo 850 N/A The slowest car I have EVER owned!!!

01-14-2012, 01:39 PM	#3
12arotary tumor-syphilis-itis-osis Join Date: Sep 2008 Posts: 191 Rep Power: 18	If you are talking about the screen right at fuel inlet pipe, right on the outside of the carb on the side facing the distributor when its in the car i have always just cleaned those out and reused them __________________ 82 300d 82 Gsl 84 b2200 Diesel 88 gxl

01-21-2012, 07:53 PM	#5
one320fc one Apex @ a time Join Date: Feb 2008 Location: Culpeper VA Posts: 272 Rep Power: 18	A buddy of mine works at a local auto parts store, I got it for 35.00 after tax __________________ 1983 Limited Edition SOLD 1977 Mazda REPU I will work on it one day I sware!! 1987 T2 um after the repu is done?? 2013 Chrysler 200 DD 2009 Dodge Journey 94 Volvo 850 N/A The slowest car I have EVER owned!!!

11-25-2013, 01:58 AM	#11
Pink Monster The Newbie Join Date: Nov 2013 Posts: 1 Rep Power: 0	Nikki carb jetting Hi all if any one can assist me please I'm from South Africa I need the jetting sizes on n 12A full street port engine its an old 79 model engine if possible can someone email me thenads747@gmail.com thanks Regards Wynand AKA Pink monster

01-20-2012, 01:55 AM	#4
heavyarms89 The Newbie Join Date: Mar 2010 Posts: 5 Rep Power: 0	i was told from a very reliable source if you are using a good inline filter then the screens are not needed. also where did you get your rebuild kit and how much did you pay for it.

01-22-2012, 08:38 PM	#6
Rich@SR SR Race Engineering Join Date: Jan 2012 Location: Loxahatchee, FL Posts: 81 Rep Power: 14	No kit that i'm aware of come with the screens and in my opinion it's ok to not replace them if you have an inline filter. Otherwise just clean the old ones in some parts cleaner and put them back in. Also my personal choice is the GP Sorenson kit from autozone. Compaired to other kits I've purchased... some twice the price... it's the best one. Just make sure you get the one that comes with the check balls, it's like 3 bucks more.