WTB: oil feed line, and 3 lim block offs

silverfd3s · 06-25-2008, 09:57 AM

as the title states i need oil feed line and the 3 lim block off plates.trying to go single please help.thanks,jay

IR Performance · 06-29-2008, 02:58 PM

Which oil feed line? Stock to the turbos? I have block off plates too. What do you need? You really only need to block off the air control valve and egr if you are deleting emissions. The two smaller ports towards the back of the lim can be left open. Blocking them off is strictly cosmetic.

silverfd3s · 06-29-2008, 11:15 PM

i need an oil feed line for a single turbo set up.i think from where the banjo bolt goes all the way to the turbo.unless you have a better set up. and the block off plates.thanks,jay

IR Performance · 07-17-2008, 08:30 PM

Its going to require a different line depending on what size oil feed line the turbo accepts.

str8ryd · 07-19-2008, 05:13 PM

I have one. $30 shipped. I'd prefer to send you a picture of it prior to any sale so there are no problems. PM me if interested. I actually may even have the 3 LIM block off plates. Just need to check...

06-25-2008, 09:57 AM	#1
silverfd3s The Newbie Join Date: Mar 2008 Location: Dela-where? Posts: 25 Rep Power: 0	WTB: oil feed line, and 3 lim block offs as the title states i need oil feed line and the 3 lim block off plates.trying to go single please help.thanks,jay

06-29-2008, 02:58 PM	#2
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ Posts: 249 Rep Power: 18	Which oil feed line? Stock to the turbos? I have block off plates too. What do you need? You really only need to block off the air control valve and egr if you are deleting emissions. The two smaller ports towards the back of the lim can be left open. Blocking them off is strictly cosmetic. __________________ Providing rotary engine rebuilds, porting, turbo installs, parts installations, full maintenance, etc. We work on all cars. www.irperformance.com www.myspace.com/rotaryexperimentseven irperformance@live.com 732-662-1794

07-17-2008, 08:30 PM	#4
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ Posts: 249 Rep Power: 18	Its going to require a different line depending on what size oil feed line the turbo accepts. __________________ Providing rotary engine rebuilds, porting, turbo installs, parts installations, full maintenance, etc. We work on all cars. www.irperformance.com www.myspace.com/rotaryexperimentseven irperformance@live.com 732-662-1794

06-29-2008, 11:15 PM	#3
silverfd3s The Newbie Join Date: Mar 2008 Location: Dela-where? Posts: 25 Rep Power: 0	i need an oil feed line for a single turbo set up.i think from where the banjo bolt goes all the way to the turbo.unless you have a better set up. and the block off plates.thanks,jay

07-19-2008, 05:13 PM	#5
str8ryd Rotary Fan in Training Join Date: Feb 2008 Posts: 62 Rep Power: 18	I have one. $30 shipped. I'd prefer to send you a picture of it prior to any sale so there are no problems. PM me if interested. I actually may even have the 3 LIM block off plates. Just need to check...