|
RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
Car seems to pull harder at 1/2 throttle than WOT
as the titles states, the car pulls much harder at 1/2 ish throttle than at wide open throttle which leads me to think the car is pulling timing for some reason or that the oil throwing turbo just cant put out at WOT anymore. Thoughts?
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#2 |
My minds tellin' me no...
Join Date: Feb 2008
Location: Murfreesboro, TN
Posts: 4,043
Rep Power: 22 ![]() |
Is it loading up (pig rich)?
Do you have a wideband?
__________________
1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5 |
![]() |
![]() |
![]() |
#3 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
i do not. the car is stock less a DP and a FCD and the emissions removal. I run about 8lbs.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#4 |
My minds tellin' me no...
Join Date: Feb 2008
Location: Murfreesboro, TN
Posts: 4,043
Rep Power: 22 ![]() |
Hmm, similar set up to me.
Cat-back? Secondaries leaking (too much fuel)? Clogged catalytic converter? I can maybe see the timing retarding, but not that much.
__________________
1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5 |
![]() |
![]() |
![]() |
#5 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
i have no cats, and ist just a straight pipe back from the turbo.
can't verify on the injectors with the too much fuel, but i wouldn't rule it out.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#6 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
im curious if the turbo is just blowing alot of oil and its killing the quality of the combustion
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#7 |
The Newbie
Join Date: Feb 2008
Location: Elk Grove, CA
Posts: 19
Rep Power: 0 ![]() |
I have the same issue with my T2, oil blowing turbocharger and all.
Stock fuel system other than a walbro, gutted cats but stock dual exhaust and a custom 3 inch TID setup. I hit about a 10.6 :1 air/fuel ratio at WOT which makes the car feel like it doesn't have anything to put out. But if I go 1/2 - 3/4 throttle it'll stay between a mid 11 and 12.3 :1 air/fuel ratio and I can feel the power. I'm using an Innovate LM-1 with LC-1 gauge setup and analog out for my ECU to read an O2 signal so it can go into closed loop. Anyway that you can get ahold of a wideband setup? I'm thinking your having the same issue as I am with running too rich of mixture at WOT and it's killing the power. The oil blowing turbo isn't helping either haha.
__________________
1988 T2- Breakin complete Boosting 5-7 PSI Currently attending Universal Technical Institute (UTI) of Sacramento, Ca. Classes: Automotive and Toyota/Lexus elective |
![]() |
![]() |
![]() |
#8 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
hmm, i would be curious as to WHY i am putting out that much fuel. It HAS to be the injectors if that is the case. I may just wait a little bit since i want to get the Rtek 2.1 and get two new 720cc secondaries and then second the secondaries i was out for a cleaning at witchhunter and use them for the primaries when they get back.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#9 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
My one thought would be that the carbon from the excessive oil burner might be harsh on the wide band sensor. Ill probably invest in one over the winter once i get work lined up in colorado.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#10 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
my car is also now having a surging idle....
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#11 |
My minds tellin' me no...
Join Date: Feb 2008
Location: Murfreesboro, TN
Posts: 4,043
Rep Power: 22 ![]() |
Vacuum leak.
__________________
1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5 |
![]() |
![]() |
![]() |
#12 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
i have NO idea where the leak could coming from though. I need to take the manifold off and see what might be left to leak.
i have all the emissions removed and the BAC. There is one thing that comes to mind i need to check. The ports that are unused on the UIM are capped securely, ive checked several times. Other than that, i would have to look.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#13 |
Respecognize!
Join Date: Jul 2008
Location: Δx = ħ/2Δp
Posts: 3,190
Rep Power: 20 ![]() |
another thought, could the TPS be bad since that is also reportedly another cause of a sugring idle? if i have the intercooler off i might as well throw a voltmeter on it to check.
__________________
For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage | Facebook |
![]() |
![]() |
![]() |
#14 |
My minds tellin' me no...
Join Date: Feb 2008
Location: Murfreesboro, TN
Posts: 4,043
Rep Power: 22 ![]() |
I had a problem similar to this when I got back from DGRR 2K7. I developed a leak at the rear of the UIM gasket. Then when I took it off, I found out my injector bleed vacuum caps had dried out and cracked, causing a few of them to actually fall off.
Replaced all that, new gasket (thanks Landers) with a thin layer of sealant, new vac caps and good to go! No problems since. I can't believe I didn't think of it sooner. I'm getting old.
__________________
1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5 |
![]() |
![]() |
![]() |
#15 |
My minds tellin' me no...
Join Date: Feb 2008
Location: Murfreesboro, TN
Posts: 4,043
Rep Power: 22 ![]() |
Check for dead spots, but I am still going for vacuum/boost leak.
__________________
1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5 |
![]() |
![]() |
![]() |
Bookmarks |
|
|