short shifter blowout check it out!!

730RWHP12A · 03-02-2009, 06:55 PM

i just did a run of short shifters so i thought i would throw a deal up on rcc. these are new made in the usa for the fb trannys as well as the fc trannys. all bushings and boot seals are OEM mazda to insure quality.
im looking for $170 shipped
pics comming shortly!

730RWHP12A · 03-02-2009, 09:14 PM

all shifter assemblies are pre lubed and pre assembled before shipping. they also come with mounting hardware. installation should take 10 minutes max.
these shifters will reduce shift throw by 60%!

Whizbang · 03-02-2009, 09:15 PM

i had one of a similar design and it made getting into reverse a two handed operation. Are these going to have the same issue?

730RWHP12A · 03-02-2009, 09:21 PM

Quote:

Originally Posted by Low Impedance

i had one of a similar design and it made getting into reverse a two handed operation. Are these going to have the same issue?

it takes a little more effort than stock(definatly not a two handed operation!) but thats a good thing. no more 3rd gear to reverse instead of fourth mis-shifts

what brand is yours?

Whizbang · 03-02-2009, 09:23 PM

i have absolutely not idea what brand. Came in the vert i bought.

First things first i need to get my FB moving, then im sure ill be looking into this.

vex · 03-02-2009, 09:46 PM

do they reduce the height as well? Or do they stay the same height as stock but reduce the throw distance?

730RWHP12A · 03-02-2009, 10:12 PM

Quote:

Originally Posted by vex

do they reduce the height as well? Or do they stay the same height as stock but reduce the throw distance?

the height is about the same as stock the throw is reduced

730RWHP12A · 03-04-2009, 01:59 AM

ttt

misterstyx69 · 08-09-2009, 10:55 AM

BUMP.GOOD product here guys!
I notice that these shifters Do not have the Bushing on the Small ball that goes into the Shifter's Transmission block.THIS IS a GOOD thing!!!!..No more Crap wearing out after 2 months with Tiny little bushings you have to Sand to FIT.
I have a C's shifter.,I think,I bought from Japan,and it is the Same design as this Shifter.it is Very Good to Shift,and has NO slop.
I hope that people will See that your Product is actually a good design and Buy them up!!.(Hell!, IF I wouldn't have got stuck in my TII project,I would have gotten an S5,and IT needs a shifter!).Good Luck Robert.Dave.

Drama · 08-09-2009, 10:43 PM

I didn`t see were to pay, Whats the Paypal address. If your not out, I`ll get one in 3 weeks.

rx7mechusa · 08-10-2009, 02:04 AM

Also interested in picking one of these up Send paypal info in a pm plz

730RWHP12A · 10-08-2009, 03:24 PM

just an update, i have another run of short shifters ready to go..
speacial pricing for the rcc members!!!

$160.00 shipped

my paypal address is robert@rotaryshack.com

when sending payments please include your user name in the notes so i can pm you your tracking #. thanks

infernosg · 01-22-2010, 03:41 PM

Curious if you still have any of these for the FC in stock?

EDIT: What's the thread/pitch on these anyway?

***TitaniumTT*** · 01-22-2010, 05:56 PM

hmmmmm, If I were to give you the diameter for the ball, would you be able to turn out a kinda custom one for me? The ONLY difference is in the bottom ball.

730RWHP12A · 01-27-2010, 06:50 PM

Quote:

Originally Posted by TitaniumTT

hmmmmm, If I were to give you the diameter for the ball, would you be able to turn out a kinda custom one for me? The ONLY difference is in the bottom ball.

definatly

03-02-2009, 06:55 PM	#1
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california Posts: 349 Rep Power: 18	short shifter blowout check it out!! i just did a run of short shifters so i thought i would throw a deal up on rcc. these are new made in the usa for the fb trannys as well as the fc trannys. all bushings and boot seals are OEM mazda to insure quality. im looking for $170 shipped pics comming shortly! __________________ rotaryshack.com Last edited by 730RWHP12A; 03-02-2009 at 06:57 PM.

03-02-2009, 09:15 PM	#3
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 20	i had one of a similar design and it made getting into reverse a two handed operation. Are these going to have the same issue? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

03-02-2009, 09:23 PM	#5
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 20	i have absolutely not idea what brand. Came in the vert i bought. First things first i need to get my FB moving, then im sure ill be looking into this. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

03-02-2009, 09:46 PM	#6
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 19	do they reduce the height as well? Or do they stay the same height as stock but reduce the throw distance? __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-04-2009, 01:59 AM	#8
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california Posts: 349 Rep Power: 18	ttt __________________ rotaryshack.com

08-09-2009, 10:55 AM	#9
misterstyx69 .drives like MrMagoo! Join Date: Feb 2008 Location: Smiths Falls,Ontario Posts: 198 Rep Power: 18	BUMP.GOOD product here guys! I notice that these shifters Do not have the Bushing on the Small ball that goes into the Shifter's Transmission block.THIS IS a GOOD thing!!!!..No more Crap wearing out after 2 months with Tiny little bushings you have to Sand to FIT. I have a C's shifter.,I think,I bought from Japan,and it is the Same design as this Shifter.it is Very Good to Shift,and has NO slop. I hope that people will See that your Product is actually a good design and Buy them up!!.(Hell!, IF I wouldn't have got stuck in my TII project,I would have gotten an S5,and IT needs a shifter!).Good Luck Robert.Dave.

08-09-2009, 10:43 PM	#10
Drama Rotary Fanatic Join Date: Feb 2008 Location: Richmond,Ky Posts: 227 Rep Power: 18	I didn`t see were to pay, Whats the Paypal address. If your not out, I`ll get one in 3 weeks.

08-10-2009, 02:04 AM	#11
rx7mechusa no no come on start plz?! Join Date: Jul 2009 Location: FT. Campbell Posts: 56 Rep Power: 16	Also interested in picking one of these up Send paypal info in a pm plz __________________ US ARMY-OH 58D(R) Helicopter Mechanic Cars- 1988 10th AE 1993 Nissan Pathfinder (off road fun truck) 1999 GMC Suburban (10thAE personal transportation)

10-08-2009, 03:24 PM	#12
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california Posts: 349 Rep Power: 18	just an update, i have another run of short shifters ready to go.. speacial pricing for the rcc members!!! $160.00 shipped my paypal address is robert@rotaryshack.com when sending payments please include your user name in the notes so i can pm you your tracking #. thanks __________________ rotaryshack.com

01-22-2010, 03:41 PM	#13
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	Curious if you still have any of these for the FC in stock? EDIT: What's the thread/pitch on these anyway? __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS Last edited by infernosg; 01-22-2010 at 03:45 PM.

01-22-2010, 05:56 PM	#14
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	hmmmmm, If I were to give you the diameter for the ball, would you be able to turn out a kinda custom one for me? The ONLY difference is in the bottom ball. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**