Rotary Extreme GB Hood damper kit

rotaryextreme · 03-08-2009, 03:22 PM

Hi everyone.

FD hood dampers.

Normally 165 with shipping.
GB 10+ people will be 130 shipped. This includes paypal and taxes.

Payment: rotary_extreme@hotmail.com

I have 10 people, I will now start shipping the parts in the order received.

GB special will end March 31st. GROUP BUY IS NOW CLOSED

Link. http://www.rotaryextreme.com/hooddamper.html

The following list is updated as I receive payment.

1. Herblenny (one donated for DGRR) - shipped
2. Herblenny -- RCC - shipped
3. Herblenny -- RCC - shipped
4. Jason -- V8 RX7 Forum - shipped
5. Bob H. -- V8 RX7 Forum - (will ship with trailing arms and toe links)
6. Mike -- RX7 club - shipped
7. R-R-Rx7 -- RCC - shipped
8. Speedjunkie -- RCC - shipped
9. finnicky7 -- ???? - shipped
10. proz07 -- RCC - shipped

First batch shipped

afgmoto1978 · 03-09-2009, 03:25 PM

Hood Dampener Hood Bracket??

Can you provide just the brackets.

rotaryextreme · 03-09-2009, 07:35 PM

Sorry, It cost too much to really sell just the brackets. They would be 100 shipped.

Pourman · 03-09-2009, 08:23 PM

1. Herblenny (one donated for DGRR)
2. Herblenny
3. Herblenny
4. Pourman
5.
6.
7.
8.
9.
10.

rotaryextreme · 03-09-2009, 08:29 PM

Thank you Pourman

R-R-Rx7 · 03-10-2009, 06:37 AM

will that work with the feed hood aswell?

War Eagle · 03-10-2009, 02:28 PM

These are solid very and very well designed. I have them on my car. They don't mess up the hood alignment and still allow the hood to normally close. Two rotors up!

***Herblenny*** · 03-10-2009, 02:49 PM

Paid!

R-R-Rx7 · 03-10-2009, 03:57 PM

if it fits with the feed hood and closing properly im defenately getting a set

rotaryextreme · 03-10-2009, 10:40 PM

R-R-Rx7, They work with all hoods because they bolt on top the factory hood hinge. Meaning, the alignment is set to the factory hinge. The other end goes to a ball stud that you replace your fender bolts with.

Ben

rotaryextreme · 03-10-2009, 10:41 PM

Thanks Phil and War Eagle!!

speedjunkie · 03-11-2009, 02:45 AM

I'm down if we get 10 people. I know the GB ends the end of this month, but do you need payment right away, and if so, just the $130 or more?

1. Herblenny (one donated for DGRR)
2. Herblenny -- RCC
3. Herblenny -- RCC
4. Pourman -- RCC
5. Bob H. -- V8 RX7 Club
6. Mike -- RX7 club
7. speedjunkie -- RCC
8.
9.
10.

Good to see RE is back!

R-R-Rx7 · 03-11-2009, 08:14 AM

1. Herblenny (one donated for DGRR)
2. Herblenny -- RCC
3. Herblenny -- RCC
4. Pourman -- RCC
5. Bob H. -- V8 RX7 Club
6. Mike -- RX7 club
7. speedjunkie -- RCC
8. R-R-Rx7 -- RCC
9.
10.

rotaryextreme · 03-11-2009, 09:21 AM

speedjunkie, r-r-rx7

payment is required to be on the list, this gb will go through but if ever one does not, you get your refund. Or a small balance is owed because I could not get enough people for a discount from the cnc machine shop. Or, I still ofeer it at this price and I just lose money.

post #1 shows who has paid.

Ben

R-R-Rx7 · 03-11-2009, 10:12 AM

What is your paypal address?

03-09-2009, 07:35 PM	#3
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City Posts: 250 Rep Power: 17	Sorry, It cost too much to really sell just the brackets. They would be 100 shipped. __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

03-09-2009, 08:29 PM	#5
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City Posts: 250 Rep Power: 17	Thank you Pourman __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

03-10-2009, 02:49 PM	#8
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	Paid! __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

03-10-2009, 10:40 PM	#10
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City Posts: 250 Rep Power: 17	R-R-Rx7, They work with all hoods because they bolt on top the factory hood hinge. Meaning, the alignment is set to the factory hinge. The other end goes to a ball stud that you replace your fender bolts with. Ben __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

03-10-2009, 10:41 PM	#11
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City Posts: 250 Rep Power: 17	Thanks Phil and War Eagle!! __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

03-08-2009, 03:22 PM	#1
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City Posts: 250 Rep Power: 17	Rotary Extreme GB Hood damper kit Hi everyone. FD hood dampers. Normally 165 with shipping. GB 10+ people will be 130 shipped. This includes paypal and taxes. Payment: rotary_extreme@hotmail.com I have 10 people, I will now start shipping the parts in the order received. GB special will end March 31st. GROUP BUY IS NOW CLOSED Link. http://www.rotaryextreme.com/hooddamper.html The following list is updated as I receive payment. 1. Herblenny (one donated for DGRR) - shipped 2. Herblenny -- RCC - shipped 3. Herblenny -- RCC - shipped 4. Jason -- V8 RX7 Forum - shipped 5. Bob H. -- V8 RX7 Forum - (will ship with trailing arms and toe links) 6. Mike -- RX7 club - shipped 7. R-R-Rx7 -- RCC - shipped 8. Speedjunkie -- RCC - shipped 9. finnicky7 -- ???? - shipped 10. proz07 -- RCC - shipped First batch shipped __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08. Last edited by rotaryextreme; 03-30-2009 at 09:51 AM.

03-09-2009, 03:25 PM	#2
afgmoto1978 Rotary Fanatic Join Date: Mar 2008 Location: Portland, Oregon Posts: 381 Rep Power: 18	Hood Dampener Hood Bracket?? Can you provide just the brackets.

03-09-2009, 08:23 PM	#4
Pourman Rotary Fanatic Join Date: Mar 2008 Location: Perdido Key , Florida Posts: 320 Rep Power: 18	1. Herblenny (one donated for DGRR) 2. Herblenny 3. Herblenny 4. Pourman 5. 6. 7. 8. 9. 10.

03-10-2009, 06:37 AM	#6
R-R-Rx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 90 Rep Power: 18	will that work with the feed hood aswell?

03-10-2009, 02:28 PM	#7
War Eagle Rotary Fanatic Join Date: Apr 2008 Posts: 240 Rep Power: 18	These are solid very and very well designed. I have them on my car. They don't mess up the hood alignment and still allow the hood to normally close. Two rotors up!

03-10-2009, 03:57 PM	#9
R-R-Rx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 90 Rep Power: 18	if it fits with the feed hood and closing properly im defenately getting a set

03-11-2009, 02:45 AM	#12
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	I'm down if we get 10 people. I know the GB ends the end of this month, but do you need payment right away, and if so, just the $130 or more? 1. Herblenny (one donated for DGRR) 2. Herblenny -- RCC 3. Herblenny -- RCC 4. Pourman -- RCC 5. Bob H. -- V8 RX7 Club 6. Mike -- RX7 club 7. speedjunkie -- RCC 8. 9. 10. Good to see RE is back!

03-11-2009, 08:14 AM	#13
R-R-Rx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 90 Rep Power: 18	1. Herblenny (one donated for DGRR) 2. Herblenny -- RCC 3. Herblenny -- RCC 4. Pourman -- RCC 5. Bob H. -- V8 RX7 Club 6. Mike -- RX7 club 7. speedjunkie -- RCC 8. R-R-Rx7 -- RCC 9. 10.

03-11-2009, 09:21 AM	#14
rotaryextreme i like spinners Join Date: Sep 2008 Location: Union City Posts: 250 Rep Power: 17	speedjunkie, r-r-rx7 payment is required to be on the list, this gb will go through but if ever one does not, you get your refund. Or a small balance is owed because I could not get enough people for a discount from the cnc machine shop. Or, I still ofeer it at this price and I just lose money. post #1 shows who has paid. Ben __________________ The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power.--- Jalopnik www.rotaryextreme.com, after more then a 2 year break, Rotary Extreme Re-opens 9/11/08.

03-11-2009, 10:12 AM	#15
R-R-Rx7 Rotary Fan in Training Join Date: Mar 2008 Posts: 90 Rep Power: 18	What is your paypal address?