can i use a turbo to blow through a holley

jimmys79rx · 09-29-2009, 02:22 AM

ive got the holley carb on my 12a/13b and i was wondering what i would have to do to blow through it, or would i have to pressurize the whole carb,

PercentSevenC · 09-29-2009, 12:03 PM

Sure. Here's a guide:
http://www.hangar18fabrication.com/blowthru.html

NoDOHC · 09-29-2009, 07:20 PM

Actually the only big worry with a turbo is that you can't do a draw through setup and get much life out of the turbo.

The guys in the carburated and old school section should know quite a bit about this too.

09-29-2009, 02:22 AM	#1
jimmys79rx The Newbie Join Date: Jul 2009 Location: ft. walton bch.,fl Posts: 25 Rep Power: 0	can i use a turbo to blow through a holley ive got the holley carb on my 12a/13b and i was wondering what i would have to do to blow through it, or would i have to pressurize the whole carb,

09-29-2009, 07:20 PM	#3
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 17	Actually the only big worry with a turbo is that you can't do a draw through setup and get much life out of the turbo. The guys in the carburated and old school section should know quite a bit about this too. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)