FS: Garrett 60-1 single setup, stock IC/piping, fuel pump, DP, AST, NEED TO SELL ASAP

manveru · 08-29-2008, 12:27 AM

ok, so it's time to get rid of some clutter. please pm me, email (musick_5@hotmail.com), or call michael- 573 216 4414

Garret 60-1 kit: 4k miles. used to break in previous owner's engine which was about 3k, and 1k was dyno tuning, so it has been hardly boosted on at all. There is no shaft play, no it hasnt been rebuilt, it only has 4k and since it's a Garret Water-cooled turbo it has plenty of life left.

i bought this and then ended up going with a T04R. Here's the important stuff:

-.60 polished compressor side
-.96 a/r on center exhaust
-oil and water cooled
-standard Garrett cast aluminum back plate
-Dynamic seal
-360 thrust option
-circle 4 bolt discharge
-fully divided SS manifold
-REAL 40mm HKS wastegate with 1 bar spring
-3 inch mild steel DP, HEAT-WRAPPED
-wastegate plumbs back into DP for quiet w/g dump.
-air filter included
-stainless steel pressure line with aeroquip fittings, no leaks!
-Coolant lines
-oil return line

$1450 shipped or....i can start unbolting everything, make offers?

stock FD fuel pump- works perfect, replaced with a supra pump. $50

Borla XR-1 muffler- $160

autometer oil pressure and boost gauge, turboXS MBC- $10, $20 and $75

hks mushroom filter and generic cone filter- $90 and $40

aluminum AST- $80

water filler neck/thermostat housing- $60

stock hood prop-$15

stock intercooler and misc piping- $100 all together or $50 for IC, $20 for elbow and $10 for anything else

DP-$30

charlies7 · 09-21-2008, 10:11 AM

Your wastegate isnt a 40mm, its a 50mm

blucar · 12-28-2009, 11:28 PM

still for sale

aaron_bc · 12-31-2009, 06:04 PM

What's with the bumping of old threads man? No.. they aren't still for sale. It's been a year.

08-29-2008, 12:27 AM	#1
manveru The Newbie Join Date: Feb 2008 Posts: 19 Rep Power: 0	FS: Garrett 60-1 single setup, stock IC/piping, fuel pump, DP, AST, NEED TO SELL ASAP ok, so it's time to get rid of some clutter. please pm me, email (musick_5@hotmail.com), or call michael- 573 216 4414 Garret 60-1 kit: 4k miles. used to break in previous owner's engine which was about 3k, and 1k was dyno tuning, so it has been hardly boosted on at all. There is no shaft play, no it hasnt been rebuilt, it only has 4k and since it's a Garret Water-cooled turbo it has plenty of life left. i bought this and then ended up going with a T04R. Here's the important stuff: -.60 polished compressor side -.96 a/r on center exhaust -oil and water cooled -standard Garrett cast aluminum back plate -Dynamic seal -360 thrust option -circle 4 bolt discharge -fully divided SS manifold -REAL 40mm HKS wastegate with 1 bar spring -3 inch mild steel DP, HEAT-WRAPPED -wastegate plumbs back into DP for quiet w/g dump. -air filter included -stainless steel pressure line with aeroquip fittings, no leaks! -Coolant lines -oil return line $1450 shipped or....i can start unbolting everything, make offers? stock FD fuel pump- works perfect, replaced with a supra pump. $50 Borla XR-1 muffler- $160 autometer oil pressure and boost gauge, turboXS MBC- $10, $20 and $75 hks mushroom filter and generic cone filter- $90 and $40 aluminum AST- $80 water filler neck/thermostat housing- $60 stock hood prop-$15 stock intercooler and misc piping- $100 all together or $50 for IC, $20 for elbow and $10 for anything else DP-$30 __________________ 95 MBM- T04R 97 Grand Cherokee- FS, $4500, pm me. Also have FC/FD turbo goodies for sale, pm me. Last edited by manveru; 08-29-2008 at 10:16 AM. Reason: contact info

09-21-2008, 10:11 AM	#2
charlies7 one broke moderator Join Date: Feb 2008 Location: Chicago Posts: 319 Rep Power: 18	Your wastegate isnt a 40mm, its a 50mm

12-28-2009, 11:28 PM	#3
blucar The Newbie Join Date: Nov 2009 Posts: 23 Rep Power: 0	still for sale

12-31-2009, 06:04 PM	#4
aaron_bc Rotary Fan in Training Join Date: Mar 2009 Posts: 33 Rep Power: 0	What's with the bumping of old threads man? No.. they aren't still for sale. It's been a year.