WTB RHD FD steering column wipers,turn,lights switch assembly

***ZGN*** · 03-23-2011, 10:33 PM

I need a working FD steering column assembly.
The one with all the turn signals, wipers, and lights.
Let me know if you have one for sale.
Thanks,

Kevin

lt1_fd3s · 03-23-2011, 10:41 PM

yes... yes i have one i can sell... text me tomorrow and i'll get it... but i dont think its any different from the LHD ones...

or are you looking for the combo switch assembly with turn signals and wipers?

lt1_fd3s · 03-23-2011, 10:43 PM

while i've got your attention, do you need a J-spec ECU? Front harness? dash? a/c controls?

***ZGN*** · 03-23-2011, 10:47 PM

might need front harness, I need the RHD assembly with all the switches.
RHD has the lights on the right and the turn signals on the left.

lt1_fd3s · 03-23-2011, 10:49 PM

ok, so u need the combo switch... i have one...

and the front harness... i'll have to check the quality to make sure it doesn't have any cuts and things...

***ZGN*** · 03-23-2011, 10:51 PM

The front harness I might need is the one with the headlights. Not sure yet if mine is fried..

lt1_fd3s · 03-23-2011, 10:57 PM

yes, front harness that runs from the drivers side kick panel, up the fender well, across the front, down the passenger side fender well, and back into the passenger side kick panel, has 2 plugs that go into the ECU...

i have it, still in a 1/2 cut...

as for the combo switch, make me an offer man and send me your shipping address... i don't know if it works, i know it did make the head lights pop up =]

if the weather is nice, i'll see about pulling the front harness and boxing them together and sending them to you...

***ZGN*** · 03-24-2011, 08:10 AM

Just send it to me ASAP and I'll let you know if it works.

If anyone else has a known good working one let me know.

lt1_fd3s · 03-24-2011, 08:30 AM

send both? ok... i'll pull the harness off this afternoon...

***ZGN*** · 03-24-2011, 01:02 PM

the headlight/blinker switch assembly for sure, If your going to pull the harness send it too, but I am not 100% sure I'll need it. If I dont use it, I can return it to you at DGRR.

If it works you'll let me know how much $ you want for it. Maybe swap for some webhosting

THANKS!!

Jeremyclark30 · 10-19-2011, 03:35 AM

If it complex you'll let me live how often $ you necessary for it. Maybe interchange for many webhosting yes, deceiver confine that runs from the drivers support beef panel, up the fender fortunate, crossways the proximity, drink the traveller back wing compartment, and affirm into the passenger support boot panel, has 2 plugs that go into the ECU..as for the band controller, make me an request man and transmit me your business code.if the windward is fastidious.

03-23-2011, 10:33 PM	#1
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	WTB RHD FD steering column wipers,turn,lights switch assembly I need a working FD steering column assembly. The one with all the turn signals, wipers, and lights. Let me know if you have one for sale. Thanks, Kevin __________________ Kevin Last edited by ZGN; 03-23-2011 at 10:48 PM.

03-23-2011, 10:41 PM	#2
lt1_fd3s WNC Tour Guide Join Date: Feb 2008 Location: WNC Posts: 780 Rep Power: 18	yes... yes i have one i can sell... text me tomorrow and i'll get it... but i dont think its any different from the LHD ones... or are you looking for the combo switch assembly with turn signals and wipers? __________________ WNC Tour Guide - Including the Tail of the Dragon - PM for details

03-23-2011, 10:43 PM	#3
lt1_fd3s WNC Tour Guide Join Date: Feb 2008 Location: WNC Posts: 780 Rep Power: 18	while i've got your attention, do you need a J-spec ECU? Front harness? dash? a/c controls? __________________ WNC Tour Guide - Including the Tail of the Dragon - PM for details

03-23-2011, 10:47 PM	#4
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	might need front harness, I need the RHD assembly with all the switches. RHD has the lights on the right and the turn signals on the left. __________________ Kevin

03-23-2011, 10:49 PM	#5
lt1_fd3s WNC Tour Guide Join Date: Feb 2008 Location: WNC Posts: 780 Rep Power: 18	ok, so u need the combo switch... i have one... and the front harness... i'll have to check the quality to make sure it doesn't have any cuts and things... __________________ WNC Tour Guide - Including the Tail of the Dragon - PM for details

03-23-2011, 10:51 PM	#6
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	The front harness I might need is the one with the headlights. Not sure yet if mine is fried.. __________________ Kevin

03-23-2011, 10:57 PM	#7
lt1_fd3s WNC Tour Guide Join Date: Feb 2008 Location: WNC Posts: 780 Rep Power: 18	yes, front harness that runs from the drivers side kick panel, up the fender well, across the front, down the passenger side fender well, and back into the passenger side kick panel, has 2 plugs that go into the ECU... i have it, still in a 1/2 cut... as for the combo switch, make me an offer man and send me your shipping address... i don't know if it works, i know it did make the head lights pop up =] if the weather is nice, i'll see about pulling the front harness and boxing them together and sending them to you... __________________ WNC Tour Guide - Including the Tail of the Dragon - PM for details

03-24-2011, 08:10 AM	#8
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	Just send it to me ASAP and I'll let you know if it works. If anyone else has a known good working one let me know. __________________ Kevin

03-24-2011, 08:30 AM	#9
lt1_fd3s WNC Tour Guide Join Date: Feb 2008 Location: WNC Posts: 780 Rep Power: 18	send both? ok... i'll pull the harness off this afternoon... __________________ WNC Tour Guide - Including the Tail of the Dragon - PM for details

03-24-2011, 01:02 PM	#10
*ZGN* Administrator Join Date: Jan 2008 Location: Birmingham, AL Posts: 2,264 Rep Power: 10	the headlight/blinker switch assembly for sure, If your going to pull the harness send it too, but I am not 100% sure I'll need it. If I dont use it, I can return it to you at DGRR. If it works you'll let me know how much $ you want for it. Maybe swap for some webhosting THANKS!! __________________ Kevin

10-19-2011, 03:35 AM	#11
Jeremyclark30 The Newbie Join Date: Oct 2011 Posts: 2 Rep Power: 0	If it complex you'll let me live how often $ you necessary for it. Maybe interchange for many webhosting yes, deceiver confine that runs from the drivers support beef panel, up the fender fortunate, crossways the proximity, drink the traveller back wing compartment, and affirm into the passenger support boot panel, has 2 plugs that go into the ECU..as for the band controller, make me an request man and transmit me your business code.if the windward is fastidious. __________________ 2UPC-X46 – Sony print media 2UPC-R206 - Sony print media

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode