FS 1973 RX3 with lots of extra parts

glassman · 02-27-2012, 03:48 PM

I'm selling my RX3 along with a pile of extra parts. Interior pcs, bumpers, brand new spare windshield, brand new rubber seal kit from AU, OEM brake pads, carbs and intakes, lenses & buckets, spare nose section, headlight buckets, headlight surrounds, twin dizzy's & front cover, door handles, vent louvers, combination switches, dash parts, lean jets stock carb, RB stage 1 susp kit, window crank handles, brake pedal pads, door striker, stock fuel pump, shifter boot and surround, brake reservoir, stock carb parts jets etc, sub zero bottle, vent louvers, inside door handles, fuse box, etc....

$6500 OBO takes it all

Car has no engine at the moment but will come with a running 4 port 13B with mint housings. Car is very solid.

Does not come with R100 bumpers front or rear, has the plate on it.

Nose section does not come with honeycomb grille, this is off the car.

Car is advertised elsewhere for quick sale.

Sorry car is very dirty and has not been cleaned inside, carpets are there but in poor shape. Drivers side floor pan is cracked where the rear of the seat bolts down, fairly common on these cars.

glassman · 02-27-2012, 03:49 PM

glassman · 03-02-2012, 03:34 PM

The car has 69,799 original miles and comes w/5 speed trans

glassman · 03-02-2012, 07:44 PM

Vin# S124A-120331

glassman · 03-05-2012, 12:38 PM

glassman · 03-08-2012, 11:48 AM

My friend is willing to trailer the car to the border at Coutts for crossing at Sweetgrass for $500-$600 to cover the fuel.

silverfdturbo6port · 08-31-2012, 12:12 AM

pm sent.
Im very interested in purchasing some of the spare parts from you for my restoration project. Please get back to me thanks

glassman · 10-20-2012, 11:01 AM

Still for sale

glassman · 02-28-2013, 07:17 PM

Bump

Glemyhr · 09-29-2012, 09:19 AM

Is the car sold?

glassman · 09-29-2012, 11:25 AM

Still available

Glemyhr · 09-29-2012, 02:52 PM

Do you still have all the parts? In what shape is the engine?

glassman · 09-29-2012, 03:23 PM

Yes I have all the parts still. The engine is not built yet and will be done when the car is sold. The housings are mint and the engine will be supplied with stock intake and carb or ida intake and no carb

glassman · 10-19-2012, 10:39 PM

Still for sale

RotorDad · 04-05-2013, 05:56 PM

Just curious, what you would take for just the shell?

02-27-2012, 03:48 PM	#1
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	FS 1973 RX3 with lots of extra parts I'm selling my RX3 along with a pile of extra parts. Interior pcs, bumpers, brand new spare windshield, brand new rubber seal kit from AU, OEM brake pads, carbs and intakes, lenses & buckets, spare nose section, headlight buckets, headlight surrounds, twin dizzy's & front cover, door handles, vent louvers, combination switches, dash parts, lean jets stock carb, RB stage 1 susp kit, window crank handles, brake pedal pads, door striker, stock fuel pump, shifter boot and surround, brake reservoir, stock carb parts jets etc, sub zero bottle, vent louvers, inside door handles, fuse box, etc.... $6500 OBO takes it all Car has no engine at the moment but will come with a running 4 port 13B with mint housings. Car is very solid. Does not come with R100 bumpers front or rear, has the plate on it. Nose section does not come with honeycomb grille, this is off the car. Car is advertised elsewhere for quick sale. Sorry car is very dirty and has not been cleaned inside, carpets are there but in poor shape. Drivers side floor pan is cracked where the rear of the seat bolts down, fairly common on these cars. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com Last edited by glassman; 07-23-2012 at 12:55 AM. Reason: Better pics added

02-27-2012, 03:49 PM	#2
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	__________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com Last edited by glassman; 07-23-2012 at 01:02 AM. Reason: better pics added

03-02-2012, 03:34 PM	#3
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	The car has 69,799 original miles and comes w/5 speed trans __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

03-02-2012, 07:44 PM	#4
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	Vin# S124A-120331 __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

03-05-2012, 12:38 PM	#5
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	__________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

03-08-2012, 11:48 AM	#6
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	My friend is willing to trailer the car to the border at Coutts for crossing at Sweetgrass for $500-$600 to cover the fuel. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

08-31-2012, 12:12 AM	#7
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane Posts: 79 Rep Power: 15	pm sent. Im very interested in purchasing some of the spare parts from you for my restoration project. Please get back to me thanks __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine

10-20-2012, 11:01 AM	#8
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	Still for sale Last edited by glassman; 02-28-2013 at 07:16 PM.

02-28-2013, 07:17 PM	#9
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	Bump __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

09-29-2012, 09:19 AM	#10
Glemyhr The Newbie Join Date: Sep 2012 Posts: 3 Rep Power: 0	Is the car sold?

09-29-2012, 11:25 AM	#11
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	Still available __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

09-29-2012, 02:52 PM	#12
Glemyhr The Newbie Join Date: Sep 2012 Posts: 3 Rep Power: 0	Do you still have all the parts? In what shape is the engine?

09-29-2012, 03:23 PM	#13
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	Yes I have all the parts still. The engine is not built yet and will be done when the car is sold. The housings are mint and the engine will be supplied with stock intake and carb or ida intake and no carb __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

10-19-2012, 10:39 PM	#14
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	Still for sale __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

04-05-2013, 05:56 PM	#15
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	Just curious, what you would take for just the shell? __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.