FS: 1 jdm efini seat, $375

blimp · 02-28-2008, 04:34 PM

$375 for one of the passenger seats.

circuit theory · 02-29-2008, 02:42 AM

The seats are not easily swapped from driver to passenger side by just swapping the rails but it can be done. In the first pic I dont see the recline adjusting lever so I am assuming that is the correct seat for the US drivers side since the Japanese drivers seat had the adjust lever on the outer rightside.
Those all look to be in very good condition. I remember when I bought my first set back in Cali I paid 800 for 2 and they were not in nearly this good of shape.
Good luck on the sale, and congrats to the lucky buyer.

PS are you only selling one seat or all 3?

blimp · 02-29-2008, 03:54 AM

ya i am only selling one passenger seat at this point for $375.

I plan on putting the complete set in my car once it gets warmer. I would only sell the set if the price was "right".

Raid3n · 03-03-2008, 04:12 PM

Quote:

Originally Posted by circuit theory

The seats are not easily swapped from driver to passenger side by just swapping the rails but it can be done. In the first pic I dont see the recline adjusting lever so I am assuming that is the correct seat for the US drivers side since the Japanese drivers seat had the adjust lever on the outer rightside.
Those all look to be in very good condition. I remember when I bought my first set back in Cali I paid 800 for 2 and they were not in nearly this good of shape.
Good luck on the sale, and congrats to the lucky buyer.

PS are you only selling one seat or all 3?

you dont see the recline adjuster because they are non-reclinable

circuit theory · 03-06-2008, 04:57 AM

Quote:

Originally Posted by Raid3n

you dont see the recline adjuster because they are non-reclinable

They are 2 position reclineable. The handle often breaks off of them however. I will take a pic of my recline lever tomorrow.

glh-fc · 03-14-2008, 02:49 AM

Quote:

Originally Posted by circuit theory

They are 2 position reclineable. The handle often breaks off of them however. I will take a pic of my recline lever tomorrow.

infini III seats are reclinable, infini IV seats aren't.the handles don't break off since they weren't there to begin with.

SoGlow7 · 02-29-2008, 01:41 PM

well either way very nice seats..

87 t-66 · 03-02-2008, 12:01 AM

those are some nice seats ya got there...we can be brothers

Ex-Eg-Driver · 03-03-2008, 09:32 PM

Mmmm. Efini....$375. Yuck. GL with sale.!

SLOASFK · 03-06-2008, 04:06 AM

Quote:

Originally Posted by Ex-Eg-Driver

Mmmm. Efini....$375. Yuck. GL with sale.!

You'll be in for a rude surprise if you ever buy an FD.

GL with the sale! If I had an FC, I'd be all over this

dregg100 · 03-04-2008, 10:42 AM

Infini* so is it the us or jap passenger side seat?

blimp · 03-05-2008, 01:55 PM

Quote:

Originally Posted by dregg100

Infini* so is it the us or jap passenger side seat?

The one i'm selling is for the U.S. Passenger side/JDM Driver side

Raid3n · 03-08-2008, 10:39 AM

if they are infini IV seats they are 1 piece buckets, my friend has one in his car. i'll look at it today...

BLK FC3S · 04-01-2008, 07:45 PM

What? and let my wifey have a sweet seat to sit in. pssshhhh. She's lucky she isnt sitting on a milk crate with bungy cords holding her in.

Where are you located at? I might make an offer on your set if your'e close.

BLK FC3S · 04-01-2008, 07:50 PM

BTW, shouldn't these be INFINI seats... not efini which is a 3rd gen???

02-28-2008, 04:34 PM	#1
blimp The Newbie Join Date: Feb 2008 Posts: 4 Rep Power: 0	FS: 1 jdm efini seat, $375 $375 for one of the passenger seats.

03-03-2008, 09:32 PM	#9
Ex-Eg-Driver Rotary Fan in Training Join Date: Feb 2008 Location: Norcal-209, CA Posts: 45 Rep Power: 0	Mmmm. Efini....$375. Yuck. GL with sale.! __________________ 87 RX-7 BASSSEEEEEE Red

03-04-2008, 10:42 AM	#11
dregg100 Rotary Fanatic Join Date: Feb 2008 Posts: 432 Rep Power: 18	Infini* so is it the us or jap passenger side seat? __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

02-29-2008, 02:42 AM	#2
circuit theory Rotary Fan in Training Join Date: Feb 2008 Location: Japan Posts: 94 Rep Power: 18	The seats are not easily swapped from driver to passenger side by just swapping the rails but it can be done. In the first pic I dont see the recline adjusting lever so I am assuming that is the correct seat for the US drivers side since the Japanese drivers seat had the adjust lever on the outer rightside. Those all look to be in very good condition. I remember when I bought my first set back in Cali I paid 800 for 2 and they were not in nearly this good of shape. Good luck on the sale, and congrats to the lucky buyer. PS are you only selling one seat or all 3?

02-29-2008, 03:54 AM	#3
blimp The Newbie Join Date: Feb 2008 Posts: 4 Rep Power: 0	ya i am only selling one passenger seat at this point for $375. I plan on putting the complete set in my car once it gets warmer. I would only sell the set if the price was "right".

02-29-2008, 01:41 PM	#7
SoGlow7 Rotary Fan in Training Join Date: Feb 2008 Location: Big Red Country Posts: 58 Rep Power: 18	well either way very nice seats..

03-02-2008, 12:01 AM	#8
87 t-66 Rotary Fanatic Join Date: Feb 2008 Location: Columbus, OH Posts: 161 Rep Power: 18	those are some nice seats ya got there...we can be brothers

03-08-2008, 10:39 AM	#13
Raid3n The Newbie Join Date: Mar 2008 Posts: 11 Rep Power: 0	if they are infini IV seats they are 1 piece buckets, my friend has one in his car. i'll look at it today...

04-01-2008, 07:45 PM	#14
BLK FC3S C088 Join Date: Mar 2008 Location: Mount Dora, FL (no its not a mountian) Posts: 112 Rep Power: 18	What? and let my wifey have a sweet seat to sit in. pssshhhh. She's lucky she isnt sitting on a milk crate with bungy cords holding her in. Where are you located at? I might make an offer on your set if your'e close.

04-01-2008, 07:50 PM	#15
BLK FC3S C088 Join Date: Mar 2008 Location: Mount Dora, FL (no its not a mountian) Posts: 112 Rep Power: 18	BTW, shouldn't these be INFINI seats... not efini which is a 3rd gen???