FS-Rotary Extreme Monster V-mount Chattanooga, TN

fikren · 02-15-2008, 10:36 PM

SOLD

As the title says Monster V-mount, never used purchased from Chuck at RotaryExtreme several years ago and afraid its going to be to big for me to use with the plans I have for the car. Would like to get $2200 local pick up add another $50 for delivery as its not so much heavy as it is bulky and may have to ship in two boxes to prevent damage. It includes all the hardware Chuck supplied with his kits, along with install directions I pulled from his website before it went off line. Also will include the fans on the radiator and I have already lengthened those wires. For an extra $100 I will throw in the greddy elbow if you don't already have one. The intercooler and elbow are both polished. It is set up for a twin setup but can accomidate a single with little to no modifications. I also had the radiator made with the brackets to retain the a/c condensor so it does support retaining the a/c if you so choose. Any questions drop me a pm or email at brockjonathan@gmail.com.

Thanks,
Jonathan

Brent · 02-15-2008, 10:44 PM

I've been eyeballing this for a while. If I could ever sell my Pettit Coolcharge III, I'd buy this. Good luck with the sell.

fikren · 02-15-2008, 11:53 PM

Thanks, if I can't move it on the forums I may haul it down to DGRR with me, might be hard for someone to pass up when its sitting there in front of them lol

HellBent · 02-20-2008, 07:05 AM

Good luck, your from TN. Im in Maryville/Knoxville.

fikren · 03-12-2008, 08:09 AM

ttt

85rx-7gsl-se · 03-12-2008, 10:24 AM

Bump for Nick Nolte

IamRobbyah · 03-20-2008, 02:05 AM

I'm weary of waitin to see what Jason (RX7 Store) and Ramy are gonna come up with. What exactly is required for single?

fikren · 03-20-2008, 08:02 AM

In the picture the right side pipping is in a position to mate up with the y-pipe for the twins. To make it work with a single you have two options.
1)cut the pipping on the right side and move it so it lines up with the turbo
2)get a pipe to connect to the intercooler pipe that fits to the turbo.

Other than that its just a matter of getting your bov attached to it and any other things that you may be running such as water injection.

IamRobbyah · 03-24-2008, 08:14 PM

sorry for not consolidating my questions, but can i still use my ac an turbojeff battery tray?

fikren · 03-24-2008, 11:37 PM

A/C is retainable, I had ordered the radiator with the brackets for the A/C in case I wanted to keep it. You do have to bend the A/C line so it hits the new angle which is explained in the instructions. I am not familar with the turbojeff battery tray. If it is like RotaryExtreme's mini battery setup then yes it will work, if its a regular size battery then you will either have to get a mini battery or relocate to the bins or trunk.

IamRobbyah · 03-28-2008, 06:55 PM

Cool... thx! The turbojeff is like the RE's

I'm still a couple months in debt to A-Spec, but I'm really swayed by this kit. Shortly after I got the fd, RE shut down - shucks. Hopefully (for me) u dont sell this anytime too soon. I'll keep an eye on this thread.

fikren · 04-08-2008, 10:53 PM

up

manveru · 04-13-2008, 02:41 PM

be interested in cash + greddy fmic/fluidyne setup?

fikren · 04-16-2008, 07:07 PM

Quote:

Originally Posted by manveru

be interested in cash + greddy fmic/fluidyne setup?

sorry not really interested in trades don't have a use for anything at the moment.

Thanks for the intrest though.

Jonathan

manveru · 04-18-2008, 08:37 PM

hopefully you'll have it still in another month or two. if so, lmk, and i'll take it straight up.

02-15-2008, 10:36 PM	#1
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN Posts: 318 Rep Power: 18	FS-(SOLD)Rotary Extreme Monster V-mount Chattanooga, TN SOLD As the title says Monster V-mount, never used purchased from Chuck at RotaryExtreme several years ago and afraid its going to be to big for me to use with the plans I have for the car. Would like to get $2200 local pick up add another $50 for delivery as its not so much heavy as it is bulky and may have to ship in two boxes to prevent damage. It includes all the hardware Chuck supplied with his kits, along with install directions I pulled from his website before it went off line. Also will include the fans on the radiator and I have already lengthened those wires. For an extra $100 I will throw in the greddy elbow if you don't already have one. The intercooler and elbow are both polished. It is set up for a twin setup but can accomidate a single with little to no modifications. I also had the radiator made with the brackets to retain the a/c condensor so it does support retaining the a/c if you so choose. Any questions drop me a pm or email at brockjonathan@gmail.com. Thanks, Jonathan __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets Last edited by fikren; 04-22-2008 at 04:46 PM.

02-15-2008, 11:53 PM	#3
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN Posts: 318 Rep Power: 18	Thanks, if I can't move it on the forums I may haul it down to DGRR with me, might be hard for someone to pass up when its sitting there in front of them lol __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets

03-12-2008, 08:09 AM	#5
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN Posts: 318 Rep Power: 18	ttt __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets

03-20-2008, 08:02 AM	#8
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN Posts: 318 Rep Power: 18	In the picture the right side pipping is in a position to mate up with the y-pipe for the twins. To make it work with a single you have two options. 1)cut the pipping on the right side and move it so it lines up with the turbo 2)get a pipe to connect to the intercooler pipe that fits to the turbo. Other than that its just a matter of getting your bov attached to it and any other things that you may be running such as water injection. __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets

03-24-2008, 11:37 PM	#10
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN Posts: 318 Rep Power: 18	A/C is retainable, I had ordered the radiator with the brackets for the A/C in case I wanted to keep it. You do have to bend the A/C line so it hits the new angle which is explained in the instructions. I am not familar with the turbojeff battery tray. If it is like RotaryExtreme's mini battery setup then yes it will work, if its a regular size battery then you will either have to get a mini battery or relocate to the bins or trunk. __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets

02-15-2008, 10:44 PM	#2
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX Posts: 839 Rep Power: 18	I've been eyeballing this for a while. If I could ever sell my Pettit Coolcharge III, I'd buy this. Good luck with the sell.

02-20-2008, 07:05 AM	#4
HellBent Evil and Proud Join Date: Feb 2008 Location: Maryville TN, 10 mins from the DRAGON Posts: 81 Rep Power: 18	Good luck, your from TN. Im in Maryville/Knoxville.

03-20-2008, 02:05 AM	#7
IamRobbyah The Newbie Join Date: Mar 2008 Location: 707 North Bay, Cali Posts: 14 Rep Power: 0	I'm weary of waitin to see what Jason (RX7 Store) and Ramy are gonna come up with. What exactly is required for single?

03-24-2008, 08:14 PM	#9
IamRobbyah The Newbie Join Date: Mar 2008 Location: 707 North Bay, Cali Posts: 14 Rep Power: 0	sorry for not consolidating my questions, but can i still use my ac an turbojeff battery tray?

03-28-2008, 06:55 PM	#11
IamRobbyah The Newbie Join Date: Mar 2008 Location: 707 North Bay, Cali Posts: 14 Rep Power: 0	Cool... thx! The turbojeff is like the RE's I'm still a couple months in debt to A-Spec, but I'm really swayed by this kit. Shortly after I got the fd, RE shut down - shucks. Hopefully (for me) u dont sell this anytime too soon. I'll keep an eye on this thread.

04-08-2008, 10:53 PM	#12
fikren Rotary Fanatic Join Date: Feb 2008 Location: Chattanooga, TN Posts: 318 Rep Power: 18	up __________________ 93 bb rx7 Destined to be the never ending project car or possible part source for the rotary rat rod 2008 40th Anniversary Edition RX-8 - bankruptcy owned me RE-Amemiya Super Dolphin Tail Exhaust-for sale AutoExe Front and Rear Strut Bars-for sale AutoExe Member Brace Set-for sale 2008 Honda CBR600RR - bankruptcy owned me Motivation axle/fork/barend/frame sliders ASV "unbreakable" shorty levers Tripage Integrated Tailight and Adj FE Proton Fushmounts Akrapovic Hex Carbon/TI Slip On Sato Rearsets

04-13-2008, 02:41 PM	#13
manveru The Newbie Join Date: Feb 2008 Posts: 19 Rep Power: 0	be interested in cash + greddy fmic/fluidyne setup? __________________ 95 MBM- T04R 97 Grand Cherokee- FS, $4500, pm me. Also have FC/FD turbo goodies for sale, pm me.

04-18-2008, 08:37 PM	#15
manveru The Newbie Join Date: Feb 2008 Posts: 19 Rep Power: 0	hopefully you'll have it still in another month or two. if so, lmk, and i'll take it straight up. __________________ 95 MBM- T04R 97 Grand Cherokee- FS, $4500, pm me. Also have FC/FD turbo goodies for sale, pm me.