holley projection

jimmys79rx · 08-27-2009, 02:27 PM

anybody here ever put a projection on a rotary, i was thinking it might work out ok, any ideas or anything better to use for a 79 with a 4 port 13-b

Phoenix7 · 08-27-2009, 02:34 PM

You can always go with a Sterling Nikki if you're really looking for a good, race-proven rotary carb:
http://www.sterlingmetalworks.com/th...ling_nikki.htm

Valued at over $400 is currently available at $285 IN THIS THREAD

If you are interested then not only will you get a good deal on the carb but you'll be helping RCC with give-aways at 7stock and open the possibility of a LIVE webcast for those that can't make it to 7stock this year!

Good luck with the carb search.

rx71king · 10-20-2010, 08:29 PM

Quote:

Originally Posted by Phoenix7

You can always go with a Sterling Nikki if you're really looking for a good, race-proven rotary carb:
http://www.sterlingmetalworks.com/th...ling_nikki.htm

Valued at over $400 is currently available at $285 IN THIS THREAD

If you are interested then not only will you get a good deal on the carb but you'll be helping RCC with give-aways at 7stock and open the possibility of a LIVE webcast for those that can't make it to 7stock this year!

Good luck with the carb search.

i sents two people to sterling....o god my friends are so mad at me. he carbnap. it took a long time to get thair carbs back

My5ABaby · 10-13-2011, 12:38 PM

Quote:

Originally Posted by rx71king

i sent 2 people i no to sterling....o god my friend r so mad at me. he carbnap. it took a long time to get thair carbs back

What?

PercentSevenC · 08-27-2009, 03:04 PM

I'm sure a Pro-Jection would work quite well. Tweakit.net has some tapered-bore IDA-style throttle bodies that I've been drooling over, too.

If you want to use a Sterling as Phoenix7 suggests, you'll have to re-drill a stock 4-port 13B intake manifold for the Nikki bolt pattern. As far as other carb suggestions, I'm a fan of Weber carbs and their clones.

rxtasy3 · 05-15-2010, 10:42 AM

i currently have a 4DI setup i'm planning on using on a RB holley intake. had it for quite some time just haven't taken the time to start the install. it being a DD it's hard to do things like this and chance having it down for any length of time. but it'll get there.

RX-7 Chris · 10-21-2010, 10:47 AM

The only problem I hear with the projection is the tune-ability. Also it is on the big side. Personally the Tweakit.net would probably work better for you. Also atkins makes an injection kit. http://atkinsrotary.com/store/catalo...t-p-16951.html

sen2two · 10-21-2010, 07:10 PM

I have a holley pro-jection tuned by RB. and was pulled of a running 13b... The best part about them is they come with everything. ITB's or any other TB need a lot of things to go with it. stand alone, injectors, rails, pump, ect. ect. ect.

Tuning is very easy.

ArmyOfOne · 10-13-2011, 10:25 AM

Sen2two, what size TB does the projection come with?

rx71king · 10-14-2011, 02:55 AM

^

i am trying to lay off the booze........

08-27-2009, 02:27 PM	#1
jimmys79rx The Newbie Join Date: Jul 2009 Location: ft. walton bch.,fl Posts: 25 Rep Power: 0	holley projection anybody here ever put a projection on a rotary, i was thinking it might work out ok, any ideas or anything better to use for a 79 with a 4 port 13-b

10-21-2010, 07:10 PM	#8
sen2two KTEC Join Date: Jan 2009 Posts: 642 Rep Power: 0	I have a holley pro-jection tuned by RB. and was pulled of a running 13b... The best part about them is they come with everything. ITB's or any other TB need a lot of things to go with it. stand alone, injectors, rails, pump, ect. ect. ect. Tuning is very easy. __________________ what I have: 1985 Gs:12a All motor Drag car - 1973 Rx2: Play car What I had: 93 Touring: TRADED - 91 Coupe: TRADED - 90 GTU: RHD - 88 10AE: SOLD - 87 Base: SOLD - 86 Base: SOLD - 1985 GSLSE - 85 Gsl: SOLD - 80 Gs: TRADED - 1972 Rx2

10-14-2011, 02:55 AM	#10
rx71king Rotary Fanatic Join Date: Jul 2009 Location: queens ny Posts: 117 Rep Power: 16	^i am trying to lay off the booze........

05-15-2010, 10:42 AM	#6
rxtasy3 rotary madness Join Date: Apr 2010 Location: spartanburg, sc Posts: 78 Rep Power: 16	i currently have a 4DI setup i'm planning on using on a RB holley intake. had it for quite some time just haven't taken the time to start the install. it being a DD it's hard to do things like this and chance having it down for any length of time. but it'll get there.

10-21-2010, 10:47 AM	#7
RX-7 Chris Rotary Fanatic Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 132 Rep Power: 18	The only problem I hear with the projection is the tune-ability. Also it is on the big side. Personally the Tweakit.net would probably work better for you. Also atkins makes an injection kit. http://atkinsrotary.com/store/catalo...t-p-16951.html

10-13-2011, 10:25 AM	#9
ArmyOfOne The Newbie Join Date: Oct 2011 Posts: 4 Rep Power: 0	Sen2two, what size TB does the projection come with?