Hello All! A new member here!

braggy_g2 · 10-11-2010, 12:45 AM

Hi everyone!
I'm a new member in this forum, and I look forward to find useful information regarding Rotaries and hopefully be able to contribute in the future.

My rotary car is an RX-7 86 N/A, bought it for $500 with a bad engine. Brought it to a shop (R&R Rotary Inland Empire, CA), they did a good job in restoring the engine. Since then I had the car for 5 years without any major breakdown.

Cheers to all!

NoDOHC · 10-13-2010, 10:50 PM

I got my '86 with a 'bad engine' and it turned out to be a vacuum line

I hope that you find yourself a niche here and can contribute. Read some of the buildup threads for inspiration.

Welcome to the club!

10-11-2010, 12:45 AM	#1
braggy_g2 The Newbie Join Date: Oct 2010 Posts: 2 Rep Power: 0	Hello All! A new member here! Hi everyone! I'm a new member in this forum, and I look forward to find useful information regarding Rotaries and hopefully be able to contribute in the future. My rotary car is an RX-7 86 N/A, bought it for $500 with a bad engine. Brought it to a shop (R&R Rotary Inland Empire, CA), they did a good job in restoring the engine. Since then I had the car for 5 years without any major breakdown. Cheers to all!

10-13-2010, 10:50 PM	#2
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 17	I got my '86 with a 'bad engine' and it turned out to be a vacuum line I hope that you find yourself a niche here and can contribute. Read some of the buildup threads for inspiration. Welcome to the club! __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode