Digi Dash Mount Fab - Page 4

chibikougan · 03-04-2011, 05:38 PM

Got em here is you arrow leds.

http://www.signal-construct.de/index...infolamps.html

Another

http://www.conrad.com/LED-indicator-..._17318_0233517

These guys are in the US and can get Signal-Construct stuff.

http://www.alliedelec.com/

vex · 03-04-2011, 06:15 PM

Quote:

Originally Posted by chibikougan

Got em here is you arrow leds.

http://www.signal-construct.de/index...infolamps.html

That's the site I pulled the PDF from. I've emailed them, but no response yet.

Quote:

Another

http://www.conrad.com/LED-indicator-..._17318_0233517

Thanks. Now to see if they'll accept international orders... It looks like they don't ship to the USA.

chibikougan · 03-04-2011, 06:30 PM

He says USA and Canada but it says because of high insurance costs. So maybe he will since you will be ordering such few LEDs. If not get a hold of http://www.alliedelec.com/ they are in the US and seem to be able to get Signal-Construct products.

vex · 03-04-2011, 07:02 PM

I may end up going with these to make my life easier:
http://www.kingbrightusa.com/categor...angular&Page=1

I'd prefer
http://www.ledtronics.com/Products/P...ls.aspx?WP=435

but with the minimum orders that makes it harder to deal with.

***TitaniumTT*** · 03-04-2011, 07:14 PM

Or .... OR... just throwing this out here... go to radio shack and get some normal fricking LED's and be done with it..... just a suggestion

vex · 03-04-2011, 07:57 PM

Quote:

Originally Posted by TitaniumTT

Or .... OR... just throwing this out here... go to radio shack and get some normal fricking LED's and be done with it..... just a suggestion

I don't want regular LEDs for blinkers (too small, etc, etc, etc). For Brights indication and WBO2 indication will do. I'm actually going to hit up Radio Shack tomorrow and see what they have.

vex · 03-05-2011, 12:25 PM

Well, I bought some regular old LED's, but I'm not going simple

But this is a handy tool for people deciding to wire up their own LED's

http://led.linear1.org/1led.wiz

Remember: Anode (connect +) is the long lead from the LED, while the cathode (connect -) is the short.

vex · 03-06-2011, 11:56 PM

I found what I'm going to replace the Innovate push-button and LED with:

I'm also toying withe the idea that I will replace the IQ3 dash buttons with these similar type buttons:

Thoughts?

(I'll be working on modeling the on the dash shortly)

***TitaniumTT*** · 03-06-2011, 11:59 PM

What's the OD of them?

vex · 03-07-2011, 12:05 AM

The OD mounting spec is 16mm, with the bezel it comes to just shy of 18mm

***TitaniumTT*** · 03-07-2011, 12:08 AM

Kinda big to put on the dash, no?

vex · 03-07-2011, 12:12 AM

They're a bit bigger than I would like; yes. But they seem to fit without issue on the dash. I'll post up a work in progress which shows the mounting holes:

***TitaniumTT*** · 03-07-2011, 12:34 AM

Whats the space for the one gauge it looks like you've got on the outside?

vex · 03-07-2011, 01:24 AM

Here's what the Dash looks like with those buttons. I don't know how to simulate leather wrapping on it, but you get a pretty good idea of what's going on anyways.

vex · 03-07-2011, 01:25 AM

Quote:

Originally Posted by TitaniumTT

Whats the space for the one gauge it looks like you've got on the outside?

Are you talking about the hole on the left side? If so it's the Fuel level gauge.

03-04-2011, 07:02 PM	#49
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	I may end up going with these to make my life easier: http://www.kingbrightusa.com/categor...angular&Page=1 I'd prefer http://www.ledtronics.com/Products/P...ls.aspx?WP=435 but with the minimum orders that makes it harder to deal with. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-04-2011, 07:14 PM	#50
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Or .... OR... just throwing this out here... go to radio shack and get some normal fricking LED's and be done with it..... just a suggestion __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-05-2011, 12:25 PM	#52
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	Well, I bought some regular old LED's, but I'm not going simple But this is a handy tool for people deciding to wire up their own LED's http://led.linear1.org/1led.wiz Remember: Anode (connect +) is the long lead from the LED, while the cathode (connect -) is the short. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-06-2011, 11:56 PM	#53
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	I found what I'm going to replace the Innovate push-button and LED with: I'm also toying withe the idea that I will replace the IQ3 dash buttons with these similar type buttons: Thoughts? (I'll be working on modeling the on the dash shortly) __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-06-2011, 11:59 PM	#54
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	What's the OD of them? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-07-2011, 12:05 AM	#55
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	The OD mounting spec is 16mm, with the bezel it comes to just shy of 18mm __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

03-07-2011, 12:08 AM	#56
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Kinda big to put on the dash, no? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-07-2011, 12:34 AM	#58
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Whats the space for the one gauge it looks like you've got on the outside? __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode