SAFC correction

karlmowermd · 10-02-2013, 02:26 PM

Hey guys,

I installed SAFC 1 in my car. S5 N/A. It has a S4 keg and I have free flowing exhaust. Narrow band gauge is en route as we speak, but I wonder what some of the correction percentages you guys use on the high throttle? I have no intention of going wideband. I have been tuning by sound and feel and will inspect the plugs soon. So far I added 1% at 1000 left everything flat till 4k and trimmed gradually in the rpm range up to 8%. FWIW, I want to run car on dyno someday so that's an option for later.

mazpower · 10-02-2013, 03:10 PM

Every car is different and a correction for one car will not work on another. Tuning with anything other than a wideband is folly on a rotary and will result in blown apex seals. Do it right or don't do it at all. Good luck.

10-02-2013, 02:26 PM	#1
karlmowermd The Newbie Join Date: Jun 2013 Posts: 2 Rep Power: 0	SAFC correction Hey guys, I installed SAFC 1 in my car. S5 N/A. It has a S4 keg and I have free flowing exhaust. Narrow band gauge is en route as we speak, but I wonder what some of the correction percentages you guys use on the high throttle? I have no intention of going wideband. I have been tuning by sound and feel and will inspect the plugs soon. So far I added 1% at 1000 left everything flat till 4k and trimmed gradually in the rpm range up to 8%. FWIW, I want to run car on dyno someday so that's an option for later.

10-02-2013, 03:10 PM	#2
mazpower Rawr Bearclaw Join Date: Feb 2008 Location: The Souf Posts: 197 Rep Power: 18	Every car is different and a correction for one car will not work on another. Tuning with anything other than a wideband is folly on a rotary and will result in blown apex seals. Do it right or don't do it at all. Good luck. __________________ Illicit Performance Rotary building, porting, tuning, chassis dyno services www.illicitperformance.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode