HI I Am A New Member , From Canada

justin lilley · 09-25-2009, 03:59 PM

HI I Am A New Member , I have Two First Gen RX7's My Cars are both First gens one is an 1984 GSL SE Thats my daily driver ..My other RX7 is a 1985 Targa With a Second Gen front end , 20B Single Turbo, Dry Sump Oil System ,Methanol Injected, 50 shot Niteros , Connected to a W58 Supra 5 speed with a mustang 8"..I drive it on nice days only and use it mostly for car shows ..I have some Pictures of the build in progress . If you would like to see them on ... photobucket... http://photobucket.com/My-20-B-Build .. I hope you like it ..

wanganwarrior · 09-26-2009, 11:09 PM

wow, i bet that will scoot! Are 20b's easy to get a hold of up there?

BigIslandSevens · 09-27-2009, 07:04 AM

^^As easy as they are here

They are not hard to find. All you need is money.

Do you have any pics of the FC front end install?And maybe the adapter for the trans if it was needed. Nice cars.

justin lilley · 09-28-2009, 08:35 PM

Quote:

Originally Posted by BigIslandSevens

^^As easy as they are here

They are not hard to find. All you need is money.

Do you have any pics of the FC front end install?And maybe the adapter for the trans if it was needed. Nice cars.

Yes; a few pics of front end on http://photobucket.com/My-20-B-Build

Adaptor plate Custom made By Forcefed Preformance.... http://forcefedracing.ca/

.

dregg100 · 09-28-2009, 11:58 PM

by front end, i believe he means front subframe and suspension.

BigIslandSevens · 09-29-2009, 07:16 AM

Yeah I meant the subframe area. I am debating for a furture project of swapping in the FC frame for engine mounting purposes or just fabb my own mounts off the frame and use the RE-SPEED steering rack upgrade. I have been reading others experiences on the swap and was just curious. As noone posted pics of it.

Dave

prrex4ever · 09-29-2009, 08:33 PM

Awesome FB, great build. Congrats!

RotorDad · 10-01-2009, 05:59 PM

Nice FB you got there.

justin lilley · 11-02-2009, 04:26 PM

I Have A Few More Pics. Of The Front End .. Hope They Help .. http://photobucket.com/My-20-B-Build

09-25-2009, 03:59 PM	#1
justin lilley 20B Join Date: Jul 2009 Location: Regina , Saskatchewan , Canada Posts: 88 Rep Power: 17	HI I Am A New Member , From Canada HI I Am A New Member , I have Two First Gen RX7's My Cars are both First gens one is an 1984 GSL SE Thats my daily driver ..My other RX7 is a 1985 Targa With a Second Gen front end , 20B Single Turbo, Dry Sump Oil System ,Methanol Injected, 50 shot Niteros , Connected to a W58 Supra 5 speed with a mustang 8"..I drive it on nice days only and use it mostly for car shows ..I have some Pictures of the build in progress . If you would like to see them on ... photobucket... http://photobucket.com/My-20-B-Build .. I hope you like it .. Last edited by justin lilley; 11-20-2009 at 08:53 PM.

09-28-2009, 11:58 PM	#5
dregg100 Rotary Fanatic Join Date: Feb 2008 Posts: 432 Rep Power: 18	by front end, i believe he means front subframe and suspension. __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

10-01-2009, 05:59 PM	#8
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	Nice FB you got there. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.

11-02-2009, 04:26 PM	#9
justin lilley 20B Join Date: Jul 2009 Location: Regina , Saskatchewan , Canada Posts: 88 Rep Power: 17	I Have A Few More Pics. Of The Front End .. Hope They Help .. http://photobucket.com/My-20-B-Build Last edited by justin lilley; 11-20-2009 at 08:51 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-26-2009, 11:09 PM	#2
wanganwarrior Rotary Fanatic Join Date: Jul 2009 Posts: 108 Rep Power: 17	wow, i bet that will scoot! Are 20b's easy to get a hold of up there?

09-27-2009, 07:04 AM	#3
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC Posts: 201 Rep Power: 18	^^As easy as they are here They are not hard to find. All you need is money. Do you have any pics of the FC front end install?And maybe the adapter for the trans if it was needed. Nice cars.

09-29-2009, 07:16 AM	#6
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC Posts: 201 Rep Power: 18	Yeah I meant the subframe area. I am debating for a furture project of swapping in the FC frame for engine mounting purposes or just fabb my own mounts off the frame and use the RE-SPEED steering rack upgrade. I have been reading others experiences on the swap and was just curious. As noone posted pics of it. Dave

09-29-2009, 08:33 PM	#7
prrex4ever Rotary Fanatic Join Date: Oct 2008 Posts: 274 Rep Power: 18	Awesome FB, great build. Congrats!