Goopy Solid One Piece Dowel Pins ....Now in stock !

GoopyPerformance · 08-12-2011, 05:53 PM

New technology from Goopy Performance

Precision manufactured solid Dowel pins for 12A, 13B and 20B engines.
These solid dowel pins help keep High HP engines aligned adding rigidness.

One can be used on the lower side with no modifications now if you wish to run 2 solid dowel pins you will be required to run external oiling so you can bypass the oil passage in the oem dowels.

$125.00 13B & 12A

$175.00 20B

Goopy Performance
Stony Point NY 10980
845-947-0007
www.GoopyPerformance.com

MAtt 6:33

Ian · 08-12-2011, 06:30 PM

no modification require, Neat. I know it was a pretty penny to get my extra dowels installed. Or pinned what ever you call it. Good deal here..

speedjunkie · 08-14-2011, 01:30 AM

Nice!! I'll think about this for the next build.

classicauto · 08-18-2011, 04:35 PM

So is the tension bolt left out if you run one in the lower position?

730RWHP12A · 08-18-2011, 09:00 PM

the housing is the weak point, not the dowel pin. i don't get it.

rx71king · 08-20-2011, 12:42 AM

^^me to...

GoopyPerformance · 09-10-2011, 02:06 PM

You can add one solid dowel pin on the lower side for extra strength with no modifications.
One of the primary reasons for these pins is keeping the front and rear main bearings (more) concentric.

ball joint · 01-27-2012, 09:55 AM

Sounds like a good idea as long as you use two dowels. What kind of material are you using to match the hardness of stock dowels?

Teamfc3 · 02-26-2012, 09:22 PM

Is the price for a pair? And would these be just as good as studding or pinning.

GoopyPerformance · 02-27-2012, 08:25 AM

They are made with a proprietary alloy intended for its overall toughness.
Price is 125.00 each on the 13B.

There is an advantage to using these over the factory dowels but they are not meant to replace our oversize bolt kit.

Quote:

Originally Posted by Teamfc3

Is the price for a pair? And would these be just as good as studding or pinning.

1twistedrx7 · 02-27-2012, 09:06 AM

very nice .

Teamfc3 · 02-27-2012, 09:51 AM

Thank you...I guess i will have to stud the engine or try an install a REW into my FC.

TXRota · 03-05-2012, 07:41 PM

Where do I get a rebuild kit from yall?

jrallemanrotarybuilder · 07-08-2012, 04:52 PM

I have been looking for someone who made solid dowels and even looked on Goopy's site . Must be a new product that has yet to be added . Glad to see them and will call to order when ready ... hopefully soon .

jrallemanrotarybuilder · 07-08-2012, 05:07 PM

I would love to know a little more about your solid corner seals , are they heat treated ? I suppose the black color is the coating for break in . Is there anyone I can contact you have sold them to , I would like to get some feedback about the material used and if anyone has pigged -detonated and taken apart to determine how well they help up .. please do not think me to be some jerk ..just can't find any feedback concerning your corner seals . Great idea on the over size corner and apex seals!!!! smart products!!!

08-12-2011, 06:30 PM	#2
Ian REIAN Join Date: Feb 2008 Posts: 112 Rep Power: 18	no modification require, Neat. I know it was a pretty penny to get my extra dowels installed. Or pinned what ever you call it. Good deal here.. __________________ 1989 Turbo II. Track Car 1988 10thAE. Garage Queen 400+rwhp

08-18-2011, 09:00 PM	#5
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california Posts: 349 Rep Power: 18	the housing is the weak point, not the dowel pin. i don't get it. __________________ rotaryshack.com

08-20-2011, 12:42 AM	#6
rx71king Rotary Fanatic Join Date: Jul 2009 Location: queens ny Posts: 117 Rep Power: 17	^^me to... Last edited by rx71king; 08-20-2011 at 12:44 AM.

02-27-2012, 09:06 AM	#11
1twistedrx7 Rotary Fanatic Join Date: Feb 2008 Posts: 411 Rep Power: 0	very nice . __________________ Rotary Performance Motors(DGRRXI)sponsor 2011 RPM sale complete rebuilt your choice ported or bridge port short block W/RA seals 2300 no core required plus shipping. we now offer powder coating! 93 mb touring patring out sold! 93 vr touring sold 93vr died violently 93 ssm touring sold 93 black 20b project and a lot of money! underestimated !! http://rotorfest.lefora.com

07-08-2012, 04:52 PM	#14
jrallemanrotarybuilder The Newbie Join Date: Jul 2012 Location: BATON ROUGE , LA. Posts: 6 Rep Power: 0	solid dowel pins I have been looking for someone who made solid dowels and even looked on Goopy's site . Must be a new product that has yet to be added . Glad to see them and will call to order when ready ... hopefully soon .

08-14-2011, 01:30 AM	#3
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Nice!! I'll think about this for the next build.

09-10-2011, 02:06 PM	#7
GoopyPerformance Rotary parts manufacture Join Date: Sep 2010 Location: Stony point NY Posts: 170 Rep Power: 16	You can add one solid dowel pin on the lower side for extra strength with no modifications. One of the primary reasons for these pins is keeping the front and rear main bearings (more) concentric.

01-27-2012, 09:55 AM	#8
ball joint The Newbie Join Date: Nov 2010 Posts: 23 Rep Power: 0	Sounds like a good idea as long as you use two dowels. What kind of material are you using to match the hardness of stock dowels?

02-26-2012, 09:22 PM	#9
Teamfc3 Its my junk..... Join Date: Mar 2011 Location: Leavenworth IN Posts: 10 Rep Power: 0	Is the price for a pair? And would these be just as good as studding or pinning.

02-27-2012, 09:51 AM	#12
Teamfc3 Its my junk..... Join Date: Mar 2011 Location: Leavenworth IN Posts: 10 Rep Power: 0	Thank you...I guess i will have to stud the engine or try an install a REW into my FC.

03-05-2012, 07:41 PM	#13
TXRota Texas Fast Join Date: Mar 2012 Location: Houston Posts: 26 Rep Power: 0	Where do I get a rebuild kit from yall?

07-08-2012, 05:07 PM	#15
jrallemanrotarybuilder The Newbie Join Date: Jul 2012 Location: BATON ROUGE , LA. Posts: 6 Rep Power: 0	solid corner seals I would love to know a little more about your solid corner seals , are they heat treated ? I suppose the black color is the coating for break in . Is there anyone I can contact you have sold them to , I would like to get some feedback about the material used and if anyone has pigged -detonated and taken apart to determine how well they help up .. please do not think me to be some jerk ..just can't find any feedback concerning your corner seals . Great idea on the over size corner and apex seals!!!! smart products!!!