![]() |
#1 |
Rotary & Boost Addict
Join Date: Feb 2008
Location: Dallas, Ga
Posts: 203
Rep Power: 18 ![]() |
20B FD vs 2012 GT-R
__________________
'05 Copper 6s, '87 TII RX7...248whp & 224wtq @ 12lbs |
![]() |
![]() |
![]() |
#2 |
FC3S
Join Date: Jun 2010
Location: Townsville, QLD, AUS
Posts: 326
Rep Power: 15 ![]() |
No way that 7 is making 748hp.
|
![]() |
![]() |
![]() |
#3 |
Rotary Fanatic
Join Date: Feb 2008
Location: Lancaster, PA
Posts: 155
Rep Power: 18 ![]() |
Yeah, not buying it. One comment said closer to 500whp, but I'm not buying that either. That car has to weigh at least 800-1000lbs more than that FD.
|
![]() |
![]() |
![]() |
#4 |
Sigh.....
Join Date: Feb 2008
Location: Murfreesboro, TN
Posts: 2,377
Rep Power: 20 ![]() |
HP/Weight ratio GTR: 6.4
HP/Weight ratio FD: 3.7 And the GTR handled it.... rightttttttttttttt........... ![]()
__________________
1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present." |
![]() |
![]() |
![]() |
#5 |
Rotary Fanatic
Join Date: Oct 2008
Posts: 274
Rep Power: 17 ![]() |
Got to love them flames.
|
![]() |
![]() |
![]() |
#6 |
destroy, rebuild, repeat
Join Date: Feb 2008
Location: Charleston, SC
Posts: 395
Rep Power: 18 ![]() |
looked like it just had a horribly peaky power band, he kept letting off as soon as he started to pull
__________________
1993 RX-7 Touring MB, stockport 13B-REW, 9.4CR rotors, T04S 60-1/p-trim single turbo 1986 RX-7 Base project track beast |
![]() |
![]() |
![]() |
#7 |
20b FD
Join Date: Apr 2008
Posts: 105
Rep Power: 18 ![]() |
That is my FD. It did just make 748whp. Maybe the dyno was way off??? I had the boost turned down a little but likely still above 650.I 'm about ready to ask my Nephew (GTR)to take this off the internet as many people are making a lot of assumptions without know the facts. Against my better judgement I'll make a few comments. First off, this was a computer generated simulation and wasn't real.
The first 2 runs started between 40 and 50 mph. I was in 3rd cause 2nd blows the tires off. This is really slow for 3rd gear. As you'll notice, I'm coming up real fast but I'm getting to the top of 4th gear and don't want to get into boost in 5th gear. I was going way too fast anyway (145+). I also was spinning some in 3rd gear. On the last run, I did brake boost and it was smoother and I pulled him much better. The GTR is really fast and with its trans he can stay in the powerband and shifting is super fast. The car isn't really too peaky and makes peak tq at about 5500 rpm. The GTR makes more TQ than I do, stays in the peak tq range and doesn't spin. You lose ground quickly when you spin in 3rd gear. Not making excuses but explaining.
__________________
Bobby '93 20b RX-7 |
![]() |
![]() |
![]() |
#8 | |
FC3S
Join Date: Jun 2010
Location: Townsville, QLD, AUS
Posts: 326
Rep Power: 15 ![]() |
Quote:
|
|
![]() |
![]() |
![]() |
#9 |
Turbo Vert
Join Date: Aug 2010
Location: Elyria
Posts: 68
Rep Power: 15 ![]() |
I didnt know you were going down there and taking the FD. Good runs, Need some tires. Run anything else? The Cars usually put times down very close to what the dyno dictates.
Last edited by just startn; 03-24-2012 at 11:33 PM. |
![]() |
![]() |
![]() |
#10 |
Turbo Vert
Join Date: Aug 2010
Location: Elyria
Posts: 68
Rep Power: 15 ![]() |
Just over look it. All runs were done in mexico.
Last edited by just startn; 03-24-2012 at 11:35 PM. |
![]() |
![]() |
![]() |
#11 |
20b FD
Join Date: Apr 2008
Posts: 105
Rep Power: 18 ![]() |
I just moved to Georgia and my car was in Montgomery Alabama. I swung by and picked it up and trailered it down. I hammered a new Camaro... It was funny when the Camaro saw the flames, he started flashing his lights to let me know. The flames usually stay until I bump the throttle. I didn't run to much at night as I thought there were a lot of cops. I just didn't want a ticket for racing. Also, there seemed to be a lot of traffic even at 11pm. I didn't have a problem spinning in 3rd until I turned up the boost last fall. I'll get stickier tires when these wear out.
__________________
Bobby '93 20b RX-7 |
![]() |
![]() |
![]() |
#12 |
Rotary & Boost Addict
Join Date: Feb 2008
Location: Dallas, Ga
Posts: 203
Rep Power: 18 ![]() |
What part of Ga are you in?
__________________
'05 Copper 6s, '87 TII RX7...248whp & 224wtq @ 12lbs |
![]() |
![]() |
![]() |
#13 |
20b FD
Join Date: Apr 2008
Posts: 105
Rep Power: 18 ![]() |
St simons Island and Brunswick. On the coast about 1 hr above JAX, Fl.
__________________
Bobby '93 20b RX-7 |
![]() |
![]() |
![]() |
#14 |
Rotary Kush
Join Date: Feb 2011
Location: Suriname
Posts: 7
Rep Power: 0 ![]() |
__________________
"A group becomes a team when all members are sure enough of themselves and their contributions to praise the skill of others." ![]() |
![]() |
![]() |
![]() |
#15 |
Rotary Fan in Training
Join Date: Apr 2012
Posts: 78
Rep Power: 14 ![]() |
how..... 750bhp... 1K pounds lighter... and not rip that GTR a new one... impossibru!
|
![]() |
![]() |
![]() |
Bookmarks |
|
|