Possible idea.

Boostmaniac · 04-19-2008, 05:27 PM

Hey, can you guys post up injector sizes in CC or give us the formula to convert to CC?

Thanks.

My5ABaby · 04-19-2008, 05:36 PM

1 cc/min = 0.01585 gal/hour

1 gal gas = 6 lbs

1 cc/min = 0.0951 lb/hour

KGParts · 04-20-2008, 07:39 AM

Quote:

Originally Posted by Boostmaniac

Hey, can you guys post up injector sizes in CC or give us the formula to convert to CC?

Thanks.

multiply the lb/hr number by 10.5 to get your beloved cc rating.

or divide cc/min by 10.5 to convert back to lb/hr....

Its on our website already in the top navigation bar: http://kgparts.com/index.php?page=fuel-calc

There are also other calculators on our Injector Cleaning Site under "Charts"

there is also a ton of injector info under "charts" then "knowledge base" http://injector-rehab.com/kbse/kbindex.htm

Phoenix7 · 04-23-2008, 07:14 PM

Added to the list, Thanks.

http://rotarycarclub.com/showthread.php?t=1790

All very useful and Important info!

Boostmaniac · 04-24-2008, 07:42 AM

Thanks guys. I am just so used to using CC as my method of measurement.

That WAS some good info.

04-19-2008, 05:27 PM	#1
Boostmaniac Rotary Fanatic Join Date: Apr 2008 Posts: 182 Rep Power: 0	Possible idea. Hey, can you guys post up injector sizes in CC or give us the formula to convert to CC? Thanks.

04-19-2008, 05:36 PM	#2
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 2,377 Rep Power: 20	1 cc/min = 0.01585 gal/hour 1 gal gas = 6 lbs 1 cc/min = 0.0951 lb/hour __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

04-24-2008, 07:42 AM	#5
Boostmaniac Rotary Fanatic Join Date: Apr 2008 Posts: 182 Rep Power: 0	Thanks guys. I am just so used to using CC as my method of measurement. That WAS some good info.