The Rx8 6-Speed into an FB Thread!

[Whizbang]

Parts Needed For Swap and Other Considerations

-Mazda Rx8 Transmission. 04-08 (not familiar with the newer 09 up models as they are a different manufacture but im assuming this same guide line could work)
-Turbo Flywheel and Clutch (compare 235/240 to the 236 of the Rx8)
-Rx8 Starter
-Rx8 Shifter
-Metal stock for the transmission mount
-Solution for the slave cylinder, will finalize something soon enough
-Final solution for drive shaft will come soon. Output shaft is same as a turbo II though.

Things to Think About

Now my setup lends this swap to be simpler than most. The transmissions in the FB were shorter than the FC chassis so the shifter position is not as effected as the FC will be. For the FC the shifter will move 3.5" forward. This will be less for the FB. Guesstimating around 2" to 2.5" for the FB. Add that to the fact im tall and the shifter location is essentially a non issue.

Also, i dont have a speedometer so the whole electronic speedo thing is a non issue for me. If you happen to want to retain the mechanical speedo, then well, you have problems that im not going to address for you. Real men don't need speedos. Or wear them. Its a man law.