GB:SMB Exhaust Products Introductory GB!! Great Prices & Savings for RCC Members!!

[mdude]

Here are the products that we will be offering for the RX8:



The system SMB has developed for the RX8 is a High flow cat section plus a cat back system.

A metallic substrate cat converter is used in the cat section to allow for even greater flow than the original. Our testing result proved that in this section the optimum pipe dia is 2 3/4" (which is a unique tube dia in stainless available to SMB)

The cat back section comprises of an intermediate tube, plus a rear muffler section, the cat back section utilizes a mixture of tube dia to achieve the desired results.

SMB has achieved a system that gives good increases in rear wheel Kilowatts, a noticeable driving difference through the increase in torque and quicker throttle response. The exhaust note is typical of SMB, i.e. a subtle exhaust note on constant throttle (so no cabin drone) but opens up under load to give you that true sports experience, through the design we managed to minimize the pop back under de-acceleration to an absolute minimum, the heat retained by the rear mufflers is kept to a minimum by the use of SMB's unique packaging material. (so no more smelling melting rear bumpers)

Through out the development process the staff at SMB deliberately did not view any other brands or products for the RX8. Which gave the system we produced a visually unique system, through the placement and angles the mufflers are positioned at.

This system is one of the best designs we have produced.

Here is a video/sound clip of the full exhaust system:




CAT BACK EXHAUST SYSTEM
The cat back section comprises of an intermediate tube, plus a rear muffler section, the cat back section utilizes a mixture of tube dia to achieve the desired results.

SMB has achieved a system that gives good increases in rear wheel Kilowatts, a noticeable driving difference through the increase in torque and quicker throttle response. The exhaust note is typical of SMB, i.e. a subtle exhaust note on constant throttle (so no cabin drone) but opens up under load to give you that true sports experience, through the design SMB managed to minimize the pop back under de-acceleration to an absolute minimum, the heat retained by the rear mufflers is kept to a minimum by the use of SMB's unique packaging material. (so no more smelling melting rear bumpers)

Part Number: CBMR8



METALLIC CONVERTER
A metallic substrate cat converter is used in the cat section to allow for even greater flow than the original. SMB's testing result proved that in this section the optimum pipe dia is 2 3/4" (which is a unique tube dia in stainless available to SMB)

Part Number: MR8HCC




METALLIC CONVERTER FOR FORCED INDUCTION CARS

For this application we use a 5" 200 cell high flow cat with a larger diameter resonator, the pipe work is to suit 3" tube.

Part Number: MR8HCC3




CATLESS MID PIPE FOR FULL RACE APPLICATIONS TO SUIT NORMALLY ASPIRATED VEHICLES

Part Number: MR8CLMP

CATLESS MID PIPE FOR FULL RACE APPLICATIONS TO SUIT FORCED INDUCTION VEHICLES

Part Number: MR8CLMP3