|
|||||||
| DGRR Archive Threads from Previous Deals Gap Rotary Rally Events. |
|
|
Thread Tools | Display Modes |
|
|||||||
| DGRR Archive Threads from Previous Deals Gap Rotary Rally Events. |
|
|
Thread Tools | Display Modes |
01-04-2012, 12:46 PM
|
#11 | |
|
Rotary Fan in Training
Join Date: Feb 2008
Location: St. Pete
Posts: 51
Rep Power: 18  |
Quote:
 Thats this weeks evening activity... 3 of the 4, 1.5" thick billet Steel disks have the centers bored to be hub centric.  A mandrel is turned on the lathe so I can put it on my CNC rotary table to get all the holes milled out properly.  Also the surface needs milled down to 1" thick, leaving a .5inch thick center section to turn in the lathe and make it hub centric for the rim as well. 
__________________
Scott Neville 1984 ITA (converting to something meaner) 1984 13B (Wolf 3.x) 1986 EP (Wolf 4.56) 1991 (Stockish engine, Wolf 3.0) 2005 RX8 Auto (Wife mobile) Life=counting the time till the next race... |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode