EFR Internal Waste-Gate Discussion

Turblown · 11-27-2013, 09:33 PM

I just confirmed the 7670 .92 IWG will fit a LHD FD. I am in the process of building a manifold for a car in house that we will be tuning with this setup. Unfortunately I have to finish the engine build( and there are 3 engines in-front of this one). We are sending out an 8374 IWG kit shortly to a customer in Canada, and I will stay on him for results. I am stressing another customer to use the IWG on his 8374 car( that I will also be tuning) to get some faster results. I also offered to swap him housings if it doesn't, and a free tune etc to sweeten the pot...

11-27-2013, 09:33 PM	#11
Turblown Rotary Fan in Training Join Date: Apr 2013 Posts: 59 Rep Power: 13	I just confirmed the 7670 .92 IWG will fit a LHD FD. I am in the process of building a manifold for a car in house that we will be tuning with this setup. Unfortunately I have to finish the engine build( and there are 3 engines in-front of this one). We are sending out an 8374 IWG kit shortly to a customer in Canada, and I will stay on him for results. I am stressing another customer to use the IWG on his 8374 car( that I will also be tuning) to get some faster results. I also offered to swap him housings if it doesn't, and a free tune etc to sweeten the pot... __________________ Turblown Engineering - Rotary Turbo Kits, Rotary Adaptronic ECUs and Rotary Performance Parts. TurboSource - Performance TurboChargers, Inconel Heat-Shields, and Adaptronic Distribution

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode